Recent content by Thorsinc

I used the contractors grade epoxy from color copper. I used silicone between all the wood and copper, sealed the first coat with lacquer and then mixed per the instructions and poured the epoxy. It turned out great but it's only been a few months. The reason I used this epoxy is because it was...

All of the wood with the exception of the 2 x 4s I picked up at Peterman Lumber. I believe the part number for the cherry bar rail is P-902. The scary part is cutting it, you have only got one chance to get it right or you just bought yourself some expensive firewood. I bought a few extra feet...

The chest freezer is Maytag 15 cu. Ft. I built the base using 2x4 and 3/4 play wood. The box I mounted 2 x 4s vertically as the frame and placed 3/4 oak plywood. I placed the oak because I wanted a smooth surface for the copper. I used 1/2 x 4" cheery on top of the oak to make the frames. The...

Thanks guys. I used 36 gage copper Azul Petina from color copper. I sealed the sides with Lacquer and the top i used their commercial grade epoxy. The dark wood, trim, bar rail is cherry wood with black cherry stain.

Almost left out the tap menu

I spent a long time lurking & learning how how to build a Keezer that I had pictured in my mind all on this forum. Thank all of you that have posted pictures that inspired my creation and helped with some of my challenges. My advice to anyone that is thinking of building one - Make sure you have...

I am not sure how I did it but it's up and running. After this I understand how my mom feels when she calls me to ask for help with her email. Thank you everyone for your help & time & this very cool set up. The last step, I need to brew beer to fill my kegs so I can tap it! :mug:

Thinking I must had made an error in the set up at one of the steps to cause the error I'm getting. I went back and started over from the very beginning. When I got to the RPints Installation, I ran into the same issue. I was able to move the zip folder into the pi home folder and run the unzip...

I was not able to do a screen shot but I cut and pasted it below. I moved the files from the download folder to the /pi/home folder and ran the unip command. Looks like that worked. When i ran the next command sudo mv RaspberryPints below is the message i got? inflating...

Any help is greatly appreciated. I had to walk away from it yesterday thinking Ill go back at it with a fresh mind and a positive attitude today. That did not work... I am stuck trying to unzip RasperberryPints the error code I get is "unzip: cannot find or open RaspberryPints-1.0.3.395.zip or...

Dan thank you for your help and your time. I found how to do it. You can run raspi-config any time - click on the desktop icon LXTerminal then type the command sudo raspi-config and your in. As long as this took i think i would have saved time just starting over lol

Dan Thank you for the reply - That defaults me to the screen that I need to input the password startx. From here how do I get back to the screen that I need?

I was keeping my fingers crossed, I would be able to do this without help. I am stuck and I don't want to move forward until I correct it. I have installed the OS. During the set up I adjusted the Local Timezone. But I did not do the Overscan settings, Changing Password, Boot Environment...