Recent content by Steven Sinclair

Yup, that one's cool, but I need a "local" solution. One that can provide a taplist without access to the internet. Thanks.

Hey all. Is there any sort of HTML/CSS (only), run from your own computer, digital taplist solution out there? I've tried the whole Raspberry Pints thing, but could never get it working. Thanks in advance.

I suppose...technically...turning them upside down would be an option, but with 4 16 gallon kettles, that becomes a real PITA every time I'm done brewing...then turning them back over every time. :p

If only the Mrs. knew how. :D

Yes, sibelman, looking for the tailored look in a cover for each of the 4 kettles. Thanx.

Lots of dust in the brew area. Anyone know of any sort of kettle dust cover out there? At least 18 inches diameter and 21 inches tall? Thanx in advance.

Don't know if it's full or not, but a quick turn of the valve proves there's something in there. It's an aluminum tank and weighs in at just under 40 pounds as per my scale. Thanx.

Yes, Broken Crow, I planned on securing to the wall with a brace. Yes, doug293cz, it is a gas output tank as opposed to a liquid output. Thanx for the help, guyz!

As pertains to the co2 regulators, is there anything special I would need for a 35# tank? Stroke of luck picked up this bad boy for less than $100 bucks on my local CL. Still new. Had it tested and it's gold! Just want to make sure the standard dual dial regulator I have now will work without...

So, been using Spike CF conicals for a while now and have always had stability issues when moving while full. Being a 3 leg conical and spaced really close together, when the conicals are full, then tend to tip when you move them around. Well, after a bit of planning, I have implemented a...

Yeah, don't know why they're answering no to the questions...aside from the possibility they don't know? Anyway, yes, these C206T temperature controllers are made for heating only. They will be used to control the heat wraps for the fermenters and the cooling is done with a couple of BrewBuilt™...

Thank you so much for that link, day_trippr! Greatly appreciated!!!

Getting ready to purchase 6 Inkbird C206T temperature controllers for my fermenters, but need to know if anyone knows of an extension cable that might work with the temperature probe cable. I've heard of others modifying other Inkbird controllers by cutting the wire, then splicing in a longer...

Sanke, please.

Yes, please.