Scottsj's latest activity

Congrats! Sounds like a success to me! Wish I had the room for one. I tested mine in a SS brewbucket this weekend and could get a...

About 12ish gallons of water in the keg. What I normally put into the keg pre fermentation. Before I used the site glass I was getting...

The third time is the charm: Have you tested the Tilt's FG against the hydrometer?

Didn't have as much time to test as I wanted to. I transferred from the sanke to 2-5 gallon cornys. Figured what the hell throw the...

I wrote this for another purpose, but here is my list of game changing things that made my beer consistently start scoring in the upper...

It should work, the metal is what is blocking the signal and dispersing it. If you have one available, it is definitely worth a test. If...

Hmm. Would the glass work? I have extra height. Says it can handle 120psi too. More than enough.

I thought about that. Even looked at the glass versions to get a signal through but the extra height won’t fit in my chamber ☹️

What sort of caps do you have on the Sanke kegs? Would there be space to drill a new hole through the cap? What you need for an antenna...

This is what I’m using. There’s room to add an antenna but it will be tight. After my Quad is done fermenting I may take the Sanke out...

Just a heads up, if you ferment under pressure in a snake keg, your tilt readings are going to be off.

It's possible I just got lucky and the tilt was directly under the hole too. I pulled a pint and lost signal. A pint in 12 gallons in a...

I have a 7.5 gallon Sanke. I usually do 5.5-6 gallons in it. Interesting comment on the height vs signal. I doubt I can put much more...

Pretty sure you would be fine with pressure. I thought about this too but I don’t think two gaskets would fit under my clamp. Plus, My...

The tilt uses the CR123A battery. The last company I worked for, we designed these batteries into all of our wireless products. I have...