Recent content by reversepivot

If you can't fins a joist, big toggle bolts will hold over a hundred pounds, depending on the thickness of the drywall in your ceiling. Another option, go get a giant punch bowl. I found one at Value Village for like $2. Drill lots of holes in the bottom. I used a 1/2" bit. After your mash, lift...

I always mash with 7 gallons of water in my 10 gal kettle, and I've never had a problem. I've done up to around 25 lbs or grain for a RIS.

For anyone that wants to do this, you will need to take the paintball or sodastream connector off first. Mine was so tight that the wrench actually started to smooth over the nut - a little penetrating oil overnight did the trick, and it finally came off. The CGA320 adapter I had to pick up at a...

That's by far the easiest, and if I had it to do over again, I might go with that one, but it's $65 instead of $25 for one that goes to a paintball tank.

Hope you still check in here, Lamarguy! What should be on the other end of the CGA320 adaptor? does it go from CO2 tank to sodastream fitting? Paintball? Somethingelse? I want to make sure I order the right fitting, since I can't get this at the local hardware store!