Recent content by Mikeliverpooluk

With regard to the pulsing relays mine does the same thing. I'm running a pi 2 I have 2 ssr's and 4 mechanical relays. The pulsing only occurs when I apply a gpio to a relay when I am setting the whole system up for the very first time. It is a very regular pulsing 1 second on 1 second off. As...

Ps mark your doing everything correctly as far as I can see It's what I did anyway:mug: Cheers Mike

Markgm Doug, I am also running rpi2 And I use windows with chrome on my PC I have had the same minor bug as you in that Elsinore will only save one timer and one switch when you properly shut it down. I have checked my outputs on console and log and they are the same as yours so I won't post...

I was wondering if Spanish characters were causing a naming problem - a very long shot and probably got nothing to do with it - but I wouldn't know. I had problems in the past when I used / and () in the names but I think Doug has fixed that The other thing I have noticed is recently git hub...

hi loky and welcome i did it like this and it works great on my rpi2 http://www.opentechguides.com/how-to/article/raspberry-pi/5/raspberry-pi-auto-start.html just plug in an it boots up shutdown with the new shutdown button feature then unplug rpi ive had elsinore running like...

the latest release is running great on my pi2 thanks doug. im still experimenting with it and my setup and performing some dry runs I have found that on my pi2 when you specify a gpio when creating a pid it has to be in capitals - not a problem at all if you know that for example "GPIO22"...

great idea. I think i will be able to work out how to do most of the thigs you mention. im going to have a play and do some googling !! with regard to the missing pid buttons ive found a simple fix for the time being. back date to the apr 6th version. put in all your gpio settings and...

I would like to second this comment. Im afraid I am as good as useless when it comes to computing. I have been following hbt on the side for nearly a year watching elsinore develop but only had the courage to buy a pi 3 months ago and "have a go". Before then i did not even know what a pi or...

Brilliant thanks for that. Still learning ! A lot!! I've got 2 sd cards so I'll set one up with the April version so I can continue my kegerator testing this weekend Cheers Mike

Im having problems too after a fresh install this morning. It sounds like the same issue as your having jangevaa. Ive spent the afternoon messing with it including doing a complete fresh install of raspian an elsinore in case i had something corrupted on my SD So from a virgin install this is...

dear all after several hours of sitting in front of the computer with a glass of ice water and a glass of hot water and a beer obviously ! im a little bit further on jangeeva i think your correct it doesnt matter if you are switching gpios or not. i thought cooling used to work but i did...

i think it tried to but didnt explain it very well i suppose everyone has built there electroninc hardware differently and there brewing method and the way they use there brewing equipment is different i assumed everone had a few relays that they could change to heating or cooling or...

Hi doug i have a limited number of relays so i have set up gpio22 attached to a relay with a 240v socket. when i am on a brew day i want to use gpoi22 to power a heater element plugged into the socket. then when i am done i was hoping to go into edit mode delete gpio22 from the heating webui...

Hi doug i am using gpio22 for a pid which is currently called fridge in hysteria heating mode with output inverted it works with no problems when i try and change from heating mode to cooling i get the following on the server screen and cooling doesnt work Apr 18, 2015 9:45:43 PM...

im thinking looking at the get status output that when i try and set a cooling pid the web browser is not updating elsinore config file porperly ? or not communicating properly with elsinore as the duty is still showing 0 when it should be 100 ? but also the output on the web ui also shows 0 so...