Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

mendozer
Reaction score
18

Latest activity Postings About

    • mendozer
      mendozer replied to the thread Kal Panel buildup.
      I don't have the covers, or at least I haven't found them in the box of parts from my buddy. Lamp cord is 18/2 stranded wire. The...
    • mendozer
      mendozer replied to the thread Input on frame build.
      ok the gears were turning last night and I thought of another design. For now, I'm going to use my old one since it is OK at best. But...
      • PXL_20220516_061633899.jpg
    • mendozer
      Right now in my rectangular cooler I use a custom made grain bag and there's an elbow coming off the inner wall from the ball valve...
    • mendozer
      I would have a valve on the outflow regardless on the pump. I didn't think much about the vibration. I figured on a welded or even solid...
    • mendozer
      I can't find an old thread on this although I'm sure it's been asked before. All I see are pumps mounted on stands below pots. What...
    • mendozer
      mendozer replied to the thread Input on frame build.
      this is going to be inside a utility room, right in front of a five foot window that slides. This will allow me to put a box fan in the...
    • mendozer
      mendozer replied to the thread Input on frame build.
      I went outside and measured my old stand because I forgot how big it was. Turns out not that long. I somehow remember it being quite...
      • PXL_20220512_192031729_2.jpg
    • mendozer
      I currently have a three vessel setup, HLT, cooler MT, Keggle BK. I inheirted a HERMs pot that I intend to use. I thought these were my...
    • mendozer
      I finished an electric control panel and now it's time to build a frame. I have a previously build two tier frame made of ankle iron I...
      • PXL_20220512_035057383.jpg
      • PXL_20220512_035108789.jpg
      • PXL_20220512_035114605.jpg
    • mendozer
      mendozer replied to the thread Kal Panel buildup.
      One thin i noticed was when wiring up power, the diagram shows neutral coming from the 240 inlet plug running to the bus yet the picture...
    • mendozer
      I built my own simple panel with a PWM power display several years ago but this past summer when my buddy was moving out of state and he...
      • PXL_20220510_034248406.jpg
      • PXL_20220510_034312472.jpg
      • PXL_20220510_034318300.jpg
      • PXL_20220510_034326749.jpg
      • PXL_20220510_034342205.jpg
  • Loading…
  • Loading…
Top