Recent content by luisfrancisco

Chris: That is very interesting. Could you tell us what style of beer your were brewing on your reiterated-mash, and if your efficiency went down compared to a single mash? Somehow I don't like the idea of adding DME to complete the bill. Maybe I could be comfortable not adding the crystals to...

Wow, just went over the 100 pages of this thread in a couple of days. I guess I am getting near to pulling the trigger on a 20l. I basically only do 5 gallon batches. The only thing holding me back, other than the cash outlay, is the fact that I am paying top dollar and am still limited on my...

Hi, I added some more pics to the same gallery. Here's the link: https://www.homebrewtalk.com/members/luisfrancisco/albums/kenmore-4-6-cu-ft-kegerator/ As for getting two 3 gallon kegs, I wouldn't know. What are the dimensions on those? I guess they could if you can somehow sit them on...

And another picture of the back, and you can also see the side where I had to remove the railings for the shelves in order to fit the 2 cornies. Also, note that I moved the temp controller to the back, and removed the light and cut the plastic out of where the bulb was.

There you can see the 5lb aluminum tank sitting in the back ledge with enough clearance for 2 regulators.

This is a pic of the finished kegerator complete with a dual tap tower, drip tray and a granite top that I installed.

A closer look at the top.

Kegerator with the 2 cornies inside. They do fit, but as you can see it's very tight. I also had to remove the plastic form the door as you can see it replaced by a white painted acryllic.

Sorry I hadn't come back to post. I didn't know anyone else was interested. I actually finished with the conversion. The two cornies were a tight fit, but they did fit after all. I had to move the temp controller to the back making the wires a little longer. Also had to cut the edges where the...

Just an update for everyone. I am trying to fit the two cornies and it is VERY tight. I am still not sure I will be able to fit them. I have two ball lock kegs and I already removed the plastic on the door and replaced it with a flat surface. I maybe still be able to fit them both, as I already...

Anyone else experimenting with this conversion? I've already done some more modifications and am almost ready to try this one as a kegerator. I need some help with something: While I was moving the thermostat I inadvertently pulled the green wire from where it was connected. It must have...

IMG00237 20110116 2026

So I finally found the time to go into the top of the fridge. I will say I am not the handiest person out there, nor do I have all the best tools for this. But here's what I did: I decided to cut a square in the center of the fridge over the black plastic top. I aimed for the 4 squared in the...

IMG00223 20110111 2319

IMG00225 20110111 2353