Recent content by Kfrancek

also I personally think you need at least 5 Volt at least to the input of the SSR additionally my Element setting is GPIOSimple for PID (Mash) and MOD_PWM with mod_pwm_logic for boil.

I use PIDaudrino add on and it works perfect. I am using CBPI 3.0

That's all you really need. Just looks more uniform covering all the kettles or pots.

This is what I did. I have a buddy who does siding for a living and had him bend up a hood from thicker gauge aluminum. Works well and cost about 50$

cold box is insulated, not the fridge. Fridge is wide open on sides and back. not sure about OP's setup, but looks open as well.

I have the differential (F2) set at .75 degrees so on at 7.25 and off at 6.5 but sometimes will go down a little more to 6.2 or so. My temp probe is in white labs vial filled with sand and centered both up and across inside. I have 1 " foam, but two of the three walls also have r-19 since...

I have a similar setup. Used 1" foam, original door, enough for 6 kegs. I set mine to 6.5 C. Otherwise it ran a ton. Now it runs twice an hour for 10 minutes a time or so. I'm not so sure how long the compressor will last this way,but I have the bar complete. If I put a keezer in, I would need...

I did another try at it last night and it worked this time. :mug:

Did the second run work for you? I had this same thing happen two nights ago when trying first auto tune. I know its not my sensor or wiring as I swapped the same cord to mlt sensor works, swpped the mlt pid to hlt senor and works. I did reset the P,I,D settings. brewing tomorrow for the first...

He refunded mine real quick and didn't want me to return it (as if I need more sh&t in my garage) . I know that is the reason I tried it because he said new. New my ass. There is a guy selling referbed breaker for square D panels for 65$ (said would take 55$) but I may end up biting the bullet...

Dang. There are so many on eBay and I have a bunch to do yet on my "e"-build. So I have time. Maybe next one will be ok. You can tell mine was a return item and someone stuck a plain old breaker in it. Sent from my iPhone using Home Brew

I need 10/3 romex and that is good price on the soow. Thanks for the link Sent from my iPhone using Home Brew

In sellers defense I did get refund and it says these are store returns. So I bet someone did the old switch-a-roo and "returned". Too bad I have a conscience. Sent from my iPhone using Home Brew

Yeah that's just my damn luck. Lol. He sold out since I shared with you guys and now I'm SOL. Ah well glad I could help someone else. I shouldn't be pissed. I sold things that were left in my house when I bought it and it's entirely paid for my three pid enclosure. So I'm still quite happy...

Well hopefully you have better luck as mine had only a regular 50 breaker. :/ Sent from my iPhone using Home Brew