Recent content by joe_203

Price reduced to 150

Two keggles for sale. The keggles were previously used as 120v E-Keggles and each have 2 element nuts welded. Keggle A has two 1/2 inch half couplings welded and two 1 inch electric element nuts welded. The third port is drilled for a full coupling diameter, but the welding was never...

This is exactly how my alarms are wired up and they work exactly as you have described.

I took the controller apart and found the board was burned (Not sure how it happened, but apparently I screwed up somehow). I soldered a new wire on to bridge the broken connection and the alarms now work.

Yep, that is what I would like to happen. It is almost like the contacts on the PID are not closing. There is no continuity across the terminals for alarm 1 or 2 when they are active.

My AL-P setting is set to 17.

Can someone explain how the alarm on an Auber 2352 needs to be wired? I have the hot line coming into the PID jumped to pin 13. Pin 1 runs into a switch, out of the switch, and into the alarm. The other side of the alarm runs back into the neutral of the PID. If I jump pin 13 and 1, the...

ME:ban: