Quantcast

Recent content by jkmcd3

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

  1. jkmcd3

    Texas Brewstand / Kettles / Fermenters / Chiller

    I recently bought a Unibrau system. Looking to sell my gravity fed brew stand, with 10" Banjo Burners and a high-pressure regulator and my BK, MLT, and HTL. The kettles were converted from Kegs and have Blichmann thermometer, 3-piece SS ball valve w/dip tube, site glass and a thermowell. The MLT...
  2. jkmcd3

    The Brew Stand Incredible Giveaway

    Definitely in!
  3. jkmcd3

    Brewer's Hardware 15 Gallon Stainless Steel Conical Fermenter Giveaway!

    I guess I could use something like that!!
  4. jkmcd3

    Stc 1000

    Actually the large box did not help that much, the limiting space was the gang box. I bought a 3 gang box and it got tough jamming all the wire in there. If I were to do it over again I would keep the same setup, I like having the 2 controls confined in one box. I can control my fermentation...
  5. jkmcd3

    Stc 1000

    I put together a couple of drawings for my little STC project. Basically using other drawings I found around online, including the one posted above. If you go to post number 10 on the first page, that was the final drawings...
  6. jkmcd3

    HomeBrewTalk 2013 Big Giveaway!

    Definitely In.... Wow what a big giveaway. Thanks to all the vendors!! John
  7. jkmcd3

    Multiple STC-1000 Controllers

    You know what, now that you mention that I think my mini fridge does have a 90 degree plug. It would be simple to switch them. I will check that out tonight and see what kind of plug my appliances have. John
  8. jkmcd3

    Multiple STC-1000 Controllers

    Here is the updated parts photo (showing the THHN wire and the plastic flex conduit) as well as a parts list (which keeps me organized when i go to buy everything I need). Hope this can help some of you if you are thinking of tackling a project similar to this. One thing to note is that temp...
  9. jkmcd3

    Multiple STC-1000 Controllers

    So here it is all finished up. I tested it out with some lamps and it worked perfect. I got them both programmed as well: The STC on the left controls the outlet on the left. The top outlet is cool and the bottom is heat. I will be plugging in a small 5 cubic foot chest freezer into the...
  10. jkmcd3

    Multiple STC-1000 Controllers

    So this worked. Thanks for all the help guys. I will post some pics later tonight!! John
  11. jkmcd3

    Multiple STC-1000 Controllers

    Wow, thanks for the quick reply. You read that correctly! So I could use just a small piece of wire and run it from one neutral post to the other, leaving what I currently have in place as well?
Top