Recent content by Highplainsdakota

I have the same topic posted on the AHA forum, and one senior member gave me this link. I thought I'd pass it on for everyone's information. (http://www.draughtquality.org/wp-content/uploads/2012/01/DQM_Full_Final.pdf)

Thanks for all the responses so far. Seems like I'm at least on the right track. I'd like it as permanent as possible, but I just have no experience with stainless lines. I'll have to do some research to figure out what kind of PITA that would be. The connections would probably have to be...

Good point, WayFrae; Do you have any ideas on how to run 4 SS beer lines and cool them with glycol lines? What about each end of the lines, some kind of nozzle coming out of the wall near the keg fridge end? Also, where do I get SS beer lines, and how do I splice them together. I don't...

Here is my answer at this point, so please check my work: Length = 20' Drop = 5' (0.5 x 5 = 2.5 psi added) CO2 head pressure = 12 psi 3/16 line resistance = 3 psi/ft 5/16 line resistance = 0.17 psi/ft "Connection point" is between 3/16 line and 5/16 line 1 psi at faucet for good pour X = end...

Can't you just increase the 25%/75% beer gas pressure for a higher partial pressure of CO2? If CO2 is just 25% of the gas, and you want around 12 psi CO2, can you keep it at 48 psi beer gas, then plan the line resistance accordingly?

OK, I'm new to the forum, but a long time brewer and reader. Teaser: This is going to be a draught line length / diameter / material / extras question. I'm building a new house and installing a remote draught beer system, but need some help with the specifics. This is going to get a bit...