Golddiggie's latest activity

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

  • Golddiggie
    I'm going to have to take measurements of the clamp that came with my Tapcooler to see about making an adapter for the new version. That...
  • Golddiggie
    How do you have it mounted? From what I've seen, there's no mount like with the first version where it will be on the top surface...
  • Golddiggie
    I had to trim the spring on mine to get it to work decently. Not much, just one or two rings. You'll also discover the 'trick' for...
  • Golddiggie
    I'm using the version for filling cans. Since I go direct from fermenter, the QD connection is no issue. I fill a keg (2.5 or 3 gallon)...
  • Golddiggie
    https://www.homebrewtalk.com/threads/pump-manifold-setup.695136/ I changed the cross on the wort pump for a pair of T fittings. Same...
  • Golddiggie
    Golddiggie replied to the thread Windows 11.
    Failure at <2 months is BS. Not even dying, just poor hardware or faulty firmware on the ones being sent out. I wouldn't mind so much if...
  • Golddiggie
    Golddiggie replied to the thread Windows 11.
    I might end up waiting for 10Gb ports to come 'standard' for this. Of course, it all depends on other things. like what my service speed...
  • Golddiggie
    That's why I built the manifold setup on my pumps. Now I don't have to worry about changing any connections from start to finish (wort...
  • Golddiggie
    Golddiggie replied to the thread Windows 11.
    @Nagorg I've seen routers listing at least 2.5Gb and some with 2.5/5.0 Gb WAN ports. Not many, but some. Same with the modems. It did...
  • Golddiggie
    Golddiggie replied to the thread Windows 11.
    @passedpawn @day_trippr Using the Linksys AX6000 for my router/WAP (wifi 6, but my personal laptop isn't). Has more than enough coverage...
  • Golddiggie
    Golddiggie replied to the thread Windows 11.
    Tilt provides the entire contents for the microSD card for the Pi, so who knows. No GUI on it since I went with the 'no display'...
  • Golddiggie
    @Boobajoob I have two CF10 fermenters now and the coil can get in the way at times. Plus it takes up space. I'm also looking to see how...
  • Golddiggie
    Golddiggie replied to the thread Wine/Barrel Thief?.
    So pumping it in and out of your beer?? Sounds both dirty (not as in actual dirt) and a potential oxidization risk to me. ;) IMO/IME...
  • Golddiggie
    Golddiggie replied to the thread Windows 11.
    I only have a single RPi device here. I tried one years back, but gave up on it. The current one is ONLY running Tilt Pi to pair up with...
  • Golddiggie
    With the conicals you can control how much krausen you get by fermenting with even a small amount of pressure (as little as 5psi IME)...
Top