Recent content by furet

I got the latest arduino code, i put the changes (pulseCount > 0, and the // in front of the text lign 397), and i have something, the rfid open the valves, I started pouring, the 2 others valves are shutting, and the pour is counted... but it does not stop the closing of the valves, it...

no, it only close the one I'm using ^^ this is weird actually, i cannot make the flowmeters working again... i tried to remove the valves (thanks to quickfit tube ^^) the flowmeter doesn't count the poor, I will need to check all the wiring again, but it is a pain in the ass with my setup... and...

I may have something new, as I could not really try it before, but I just put some kegs that I had in my kegerator, and when I plug them, and try them, if I scan the RFID and all the valves stay open, once I start to pour, it closes the valve I am using ^^ instantly not the other one, and if i...

I can try yes, if you help me a little in the process with some steps... This is weird yes, because sometimes it happens like twice in a row, and sometimes never during 10 or more test... ^^ it seems random, but maybe not

My raspberry pi control the valves through the relays, not my Arduino, I only have the flowmeter on the arduino... But if i test that: i think this time i only had 1 or 2 out of 3 valves that are closed right after the opening (it sound like that and after the 30sec the valves still open are...

that's weird, i don't have the WP;1 or WP;0 in the log, i put True for the flowmon and the dispatch, but nothing in the log even after restarting^^ and i don't have much difference between a good one and a bad one as you can see: (the RFID:1 worked, and the RFID:3 did not in this case ) but i...

I have a new problem with my installation, and i don't really know why, sometimes the valves close right after they open when I scan a RFID card, but not always...like 1 out of 10 maybe... not regular...that's the problem really, I tried to search for similar problem in the thread, and i found...

i tried to change the wires to the Pi, it works, the icon change to green check, but question ? is it possible to change the timing to refresh the web page ? because it refreshes too fast, and the update does not occur at the first automatic update of the database, but if i refresh the page...

to the shield, it is easier for me, but i can try to connect them to the Pi when i have the time, i think i have still some available pins, and in this case, i need to check the case Valvle Pi pin ? and put the gnd between the relay and the Pi (instead of the shield) to have the pin's state loop.

when i check my database, i see the correct pin number valvePin, and the valveOn to 0 (it changes to 1 when I click on "let it flow"), but for the valvePinState, i have NULL, and if I change that manually to 0, it changes the red cross to a green check, but not automatically... just in case, i...

yes, oki, the pins are correct and i hear the click and see the led of the relays, and when i have another internet tab with the tap's page, it refresh automatically when i click on "let it flow" or "stop", but i have some errors in the log effectively...:

No I doesn't change when I open the valve and refresh... Nothing, the red cross stays... :(

Hello again, i have more questions :P everything seems to be working well, but one thing, what is the red cross around the keg ? i assume it's link to the valves, i don't have that icon when i deactivate the valves, but it doesn't change when i open the valves... what does it mean exactly ...

Noice ! Thanks for the details, very interesting and something that I have in mind, I will try to connect all of that when i'll receive my valves ;) And i have a question about Rpints, especially for the bottles, I understand that is used for the taps mostly but is there a way to have like...

Oooooh thanks, I'm really interested with the 12v power supply, I think it is the best way to handle relays and flowmeter and valves... Can I have more details about that, what kind, the connections and others stuffs please, if it is not to much to ask? And i see that the programmation directly...