Recent content by DaddyLongLegs

So I had this thought. Take this mash profile for example: Infuse at 147 Temp rise to 156 over 30 minutes Backdrop: eBIAB, 5500w ULW ripple, recirculating By my calculations, the element will be on about 18% (maybe 20% with temp losses) of the time to reach this result. When the...

I did the pwm route as a stage, I can give the wiring diagram, but honestly I'd go with the PID and just use the manual control instead. I used a controller from balkatronics so $8 + $7.50 shipping + $2.50 for a knob + $1 or so for the capacitor + an hour to assemble all of which is non...

my .02 I use growlers on several batches. I've used the caps that come from the brewery, they're nice because they have a like a rubber gasket that's attached to the cap. I've bought replacement caps, the ones that have paper inside do not hold pressure. my latest cap purchase is a black...

This one is probably very local, but had one last night and very much enjoyed it. But at $10 each it's an expensive way to collect bottles Stone Of Destiny - The Olde Burnside Brewing Company http://beeradvocate.com/beer/profile/823/68936

Hello Long time reader, first time poster. I'm getting ready for an eBIAB build, wondering if anyone has successfully used a SCR for temperature control vs a PWM. Specifically these two...

If you do a google search for electric-heat.xls you'll get a spreadsheet that can give you boil times based on initial temp etc.