CyberFox

I've heard a lot about soft crashing IPAs in the 50s to drop ale yeast out of suspension before dry hopping, but I haven't heard much...

The FLOTit 2.0 is awesome! I ferment in kegs and it has worked flawlessly. It also barely leaves any beer behind. Seriously, just get...

I'm not rousing, but I'm going to grind the hops into a powder, so there should be no problem getting good extraction even in cold...

That's a good point, but I still have no clue if aroma loss from purging is a myth or not. It's similar to how it's thought that using a...

Wired a 3.5 car garage not long ago. All the ceiling lights and outdoor lights are on separate/dedicated circuits. We used 14ga for...

GFCI is only needed at one point, upstream from the other outlets on that circuit. That provides a single point of protection for all...

Anywhere with an electric brew kettle is by definition a location needing GFCI protection. An existing 240V receptacle could have been...

You mentioned having a few 240v outlets installed. Will they be on the same branch circuit, or will each have its own breaker? @hotbeer...

If you have a electrician coming to put in your outlet and wire it to the breaker box, then consult with him about what the codes say...

Do you already have a 240 Volt outlet with a NEMA 6 - 20R receptacle? If so, you really don't need the GFCI. If the outlet was...

Awesome idea. I'll definitely look into getting the 120V circuits wired for 20 amps. Really good info from everyone. Thanks!

Where I am from GFCI only used to be required in "wet areas", e.g. bathrooms (although now are required for any new sub circuits). This...

Really good info! I'll definitely make sure the electrician knows exactly what I'm planning to use the outlets for. I'm actually having...

I don't have 240V outlets yet, but I am going to have a few installed in my garage by an electrician. Since I'm starting from scratch...

I agree about tastebuds getting accustomed to flavors. There was one time where I drank nothing but NEIPAs for nearly a month and I...