Recent content by CraftaBrew

Yes, it will have a 1 year warranty and we will have additional units and parts on hand should anything go wrong. After testing a dozen units for thousands of collective hours we have not yet run into any parts that need replacing or any defective parts. Before the units leave the factory they...

Yes but this is not its intended use, the glycol reservoir will always stay at 30F and this is the temperature of the glycol that will be pumped out through the lines. Our out ports from The Stasis are made to connect to 3/8" ID tubing. Those items will be serviceable and we will offer...

Yes, this can be attached to any coil, jacketed fermenter, coolstick, carboy wrap etc. Cleaning the coil is not too bad since only the straight part of the stainless tubing is in the area where krausen could stick, the rest is submerged in the beer and easily rinsed.

24/7 operation should be okay but it was not what the unit was designed for and could decrease the longevity of the unit depending on the cooling load. We have not tested it in dispensing applications but there should be no reason why it should not work.

We are in the final hours and our whole team is thrilled with the amount of support we have received this far! We are happy to have your support to bring this product to life that we have been working hard on for the past 2+ years and to offer you the best price on a glycol chiller ever. Your...

Simply remove the coil and clean it after use, The Stasis can be stored without draining the glycol/water mixture or there is a plug in the bottom of the unit that can be pulled to drain when not in use if you choose. The pumps are set to flow at 65 GPH, this was the optimal flow rate for the...

We have not tested it specifically using the Anvil fermenter and cooling coil but this would be compatible with The Stasis. The only item that would need modification would be a step up to a 3/8" ID tube which is the industry standard for glycol lines. You would just need to step up the tubing...

Our engineering team thought that was the best balance between the lowest possible set temperature and limiting the amount of on/off cycles to ensure longevity fo the unit. At 36F you can still cold crash and have the same effect as if you had it set to 32F or below, the difference in time...

The Stasis is compatible with the 7 gallon SS Brewtech Chronical, we just did a test fitting on that fermenter and it does not hit the thermowell when the coil is attached to the included domed lid. Just keep in mind that the lid will need to be drilled in order to accommodate the coil. The...

This would replace the chilling portion of the Spike system so you would not need to deal with a cooler of ice or a bath of glycol inside a freezer as they recommend with their system. You can connect the temperature probe from The Stasis directly into your Spike conical's thermowell then...

This is not something we have tested, yet we are confident that you'd be able to maintain lagering temperatures in 2 10-gallon fermenters at once or be fermenting an ale while cold crashing another batch. Cold crashing 2 10-gallon batches may be entirely possible yet this is not what the chiller...

Introducing The Stasis glycol chiller - a temperature control solution built from the ground up specifically for homebrewers. Check out the Full Kickstarter Campaign Here! It’s the first glycol chiller ever to feature internal pumps & thermostats. While most glycol chillers require you to...

Happy National Homebrew day! Just a reminder, today is the last day to use the code JUSTBREWIT at checkout to save 20% off sitewide! The Catalyst is also on sale for a low price of $179 and every Catalyst ordered from CraftaBrew.com comes with the new seal 2.0! -The Craft a Brew Team

National Homebrew Day Sale In celebration of National Homebrew Day on May 7th we are offering 10% off The Catalyst and 20% off everything else on CraftaBrew.com including our 5 Gallon Recipe Kits, just use code JUSTBREWIT at checkout. Mother's Day Giveaway We're partnering with...

We have, here is some testing we did with a local Orlando Kombucha shop: