Recent content by CousinEddy

Good thought, I added some a circulation fan during heating, well see if that helps any.

Alright, so now the next problem is coming up. So I'm heating the ferm side with a small space heater. Getting great temp on the bucket with the temp sensor attached (sensor wrapped in some foam, taped to side of the bucket). The problem is the other bucket. I just have a carboy filled with...

It depends on how cold your ground water is. My water is 45 degrees, I can cool 5 gallons with 20 feet in just under ten minutes.

It doesn't really get dark in AK in the summer, so they're growing season isn't exactly the same. Interested though about something that will stand up to colder temps.

Thats funny because I haven't seen Yeungling on the west coast, but you can't walk ten feet without running into Sam Adams.

Ebay cpu fan ($3) & thrift store cell phone charger ($1)

Thanks for all the help, contacted GE and they emailed me the wiring diagram. Finished up the wiring, waiting on the kegerator supplies. to finish it up.

You're basically doing this: https://www.homebrewtalk.com/f51/side-side-kegerator-fermentation-chamber-245879/ minus the kegerator part. Just finished up my conversion, relatively easy to do.

Pulled the trigger on a setup, thanks

Thanks for the replies, this site is awesome. I wired in the first unit yesterday, pulled power from what used to be going to the ice maker. With the ebay thermostat inline when the temp drops the fan in the fridge turns on. Did I tap into the defrost system? I haven't left it on long enough...

Took a look at your build and was just double checking for I started my first attempt at appliance wiring. Thanks alot for the help. I installed the first controller, pulled power from some live wires that used to go to the ice maker. When I got the controller to kick on to cool, the fan...

Working on building the same thing, however can't for the life of me find the wiring diagram (Older GE Profile). From the looks of things there's one thermostat for the freezer and a passive thermostat for the fridge side that would open and close a damper inbetween. So my thoughts are...