Recent content by chuggs

She's just knocking down the head before she hands it to a customer...

I've got the economy model! I love the thing!! It takes a few minutes...but it beats the crap out of worm clamps and oetikers for my uses!! I recommend it for your boat, RV, truck, garden hoses...brewery!! And these guys have good prices on wire...

If you just want to mount the Primary regulator on the wall...you need a High Pressure hose like the one in your Keg Connection link. The IMPORTANT thing to know IS >>> Are you screwing it into a Regulator body that has LEFT hand threads or RIGHT hand threads. IMI Cornelius, for example, uses...

Look for a weep hole on the regulator. Cover it with your finger...does the needle go up? You've probably got to rebuild the regulator. What happens is...the valve seat leaks...so even though you didn't screw in the adjustment screw...it's letting gas past anyway. Then the diaphram is...

If you have TANK pressure...and you have ZERO secondary reading after screwing in the adjust screw...You've got a problem. It will probably require some disassembly to find the cause. I'm not familiar with the internal of that regulator...but in the IMI Cornelius regulators...there is a...

Check out: http://www.barbecuebible.com/ Look for the BBQ BOARD link in the left column. It's a forum dedicated to BBQ. I do belive there is a section on DIY smokers. Your objective is to have a fire box that holds enough charcoal/wood to enable you to not have to tend to the smoker...

That's one tough looking trailer!! I'd add a firebox like these...to make a nice smoker out of it too! http://www.diamondplateproducts.com/photos.php

I can hardly wait for REALd to come out for home theatre... I looks like you could just mount the lens in front of a DLP projector and be in business. I, for one, was really impressed. I don't care that the story has been told a hundred different ways. If that were the attitude...then why...

Welcomen! It will do you proud to see the thread dedicated to production of apfelwein!! Nice to have a space. I've got all my stuff squirelled away in my garage. It's a real pain to get everything together on brew day. Tchuss!

That must have just been released. I was up in Boston last month flying out of Logan. My hotel was less than a 2 mile walk from the Harpoon Brewery. I took a stroll over a few times to get a Growler of super fresh Harpoon! I was even able to stay for a "Tasting" one evening! Wow...they make...

http://www.plastickegsamerica.com/ I think there is some type of propietary filling mechanism used. I've never seen one in person. I'm not too crazy about the idea myself.

The way I found to study for Organic was to make up flash cards...and have an assistant go to the pub with you. Find a quiet place...order a pitcher of good beer...and have her ask you questions from the cards. Each one you get right...you get to take a swig of beer. This makes going over...

Yes...Your best bet is to go to the desk at a Electrical supply house. Although your home depot may carry the stuff. You're looking for a four conductor wire with the rubber insulation. NOT SOLID WIRE!! You want the flexible stuff. Then buy the plug and socket that you want. Purchase a...

I pour it over the rocks in a big glass...with a shot of good lemonade on top. Very thirst quenching drink for our warm Florida climate. The ice helps keep me from drinking too much too fast ---

I was in Los Angeles...and the BEVMO guy said they had some of the first shipments...they would be asking $170 per bottle. I'm sorry...but I don't think this stuff is aged 12 years in oak. I buy Single Malts for 1/4-1/3 the price...and I know they aged it longer than Utopia. When they...