Recent content by c_k_2_k

Hello Everyone! Thinking of putting a new recipe together, and wanting to know if anyone has had success mixing the following type of extracts: Dark Extract and Wheat Extract Or Dark Extract and Amber Extract Still deciding on steeping grains and hops still. I made an IPA last...

I bought a new coupler and o-rings yesterday and put everything back together. Checked for leaks, co2 line was leaking a bit so tightened it. Everything seems to be fine, I believe it was the coupler. Thanks for the help!

Thanks! This is where I'll start to hopefully correct the problem.

I'm sorry I could have put that info in here. I'm waiting for my homebrew to be done fermenting before I put it in THAT keg. I bought a 1/6 keg of a commercial beer, and was using an older Sanke coupler. It was pouring out of the top of the keg where the coupler goes in. I guess what I can't...

In your experience, would you change the sanke, the co2 regulator or both? What could make it leak that way?

I had it set at 10psi at first. Because it got foamy I turned off the CO2 and I pulled the pressure relief on the sanke and reset it lower at 8psi.

What exactly would make beer shoot out of the Sanke. I'm brand new to kegerators so just looking for some direction.

Hello Everyone. Bought a used kegerator, fairly old but fridge is still very cold. I bought all new beer lines and CO2 line. Also a installed a tower cooler. 10' of 3/16" ID brand new beer line. Cleaned and sanitized. Set everything up with a 1/6 keg, let sit for 48 hours to settle and checked...