Recent content by brewskiman

your right i just bumped up the psi to 12 and it works great pours a beer in about 8 seconds with great foam and carb thanks a lot bros

i need to insulate my tower and don't know what to get to do it?? what kind of insulation should i use??

where did you get that insulation for your tower???

i just bought a 5 gallon bootleggers- old world heff keg and tapped it. i have a keezer with a tower on it and its running at 36 deg. the co2 pressure is at 10 psi and i just put new lines in my keezer and they are 10 foot long. i used to have the standard 5 foot long lines but people told me to...

wow 10 foot lines will be better i will fur shure try that. can i buy those lines at home depot or do i have to go through beverage factory or micromatic to get them

wow so you think that a 10 foot long beer line will do the trick ?? i was talking to some one else and they told me to get a crome plated or brass shank also with the per lick crome or brass and that will solve the problem is that true???? why would i 10 foot beer line be better???

i have the standard lines that came with my tower conversion kit and think they are 5 foot long. i purchased it at beverage factory. the keezer is inside my room. what i have been doing is having a empty arrowhead bottle close to me pouring it out for a second into the plastic bottle and when...

i installed a tower cooler 80mm fan in my keezer and its blowing cold air onto the shanks just great. i thought if i installed the tower cooler the foamy first pour will go away but its still there. the whole tower is sweating cold but my per lick faucets are not sweating cold are they supposed...

its a snake keg. i think i just crushed the the clamp right in between the hex nut and that metal clamp on the beer line that goes to the coupler. beverage factory is sending me a new hex nut and clamp. so i am going to cut the hose about 1 inch and put on the new clamp on with the hex nut and...

my beer hose to my coupler is leaking beer. i have a 90 degree elbow connected to my coupler. an then the hose connected to the 90 degree elbow thats connected to the coupler its leaking drips of beer right where the clamp is on the beer hose connected to the 90 elbow that goes to the coupler. i...

is this clone the bruery- mischief?????? is that the beer your cloning here. because that is one of my favorites and will be really happy if it is. its a belgian hoppy strong ale

What kind of chest freezer is that?? i have a 7.2 cu ft frigidaire and that looks like the same one that i have.

thanks all you guys for the great info and tom i got all the parts that you listed on your website to build your own tower cooler hahah. i have a fan with a 3 speed option so i will put it at the lowest setting so its not so loud

fur shure thanks mendesm. Radio shack is selling a 9 volt 300ma for 16.99 and i would never pay that much for it , what a rip off!!!! haha. I install surveillance cameras for my job and i always have the 12 volt dc power adapters so i can get a few for free. thanks for the good advice . i think...

I am putting together a tower cooler for my keezer and have a question? will a 12 volt dc power adapter work ? i have a 12 volt cpu fan. on tower cooler.com they say to use a 9 volt 100ma one. i don't want to spend money on a 9 volt when i already have a 12 volt dc.