Recent content by BrewdogSC

Just an update, the first batch is aged and ready for drinking. This works great!! I will be using this method on all my future brews. Beer is nice and clear, carbonated perfect. Thanks for all the posts sharing your experiences!

Thanks for the tip!!! I have an old brass tap tower and could not find any John Guest fitting to use on the taps, used your method with an awl heated with the heat gun, worked like a charm.

Early on in the thread, I saw a post of someone who put NRS in a keg, then pushed it out through the valve to sanitize it. This is what I plan to do, but haven't tried it yet.

That is beautiful, great job!

Thanks Tom. I would really appreciate seeing your pressure schedule. I found the sketches you shared on harvesting CO2 for later use in carbonating very informative. It's on my list of things to try in the near future. Thanks for taking the time to share your experience! [emoji482]

I'm following the schedule that mad scientist has in his post a few pages back. This is what I'm following. On page 187 you will find this post: Fermentation Temperature and Pressure schedule: Pitched: 7-16-2013 at 10:30 AM Day 1 (0 - 12 hours) - 3 PSI @ 65 F Day 1 (12 - 18 hours) - 4 PSI @ 65...

Is there a compression fitting that you could use with it? Have you thought about silver soldering it in place? Please post how you solve this.

Here is the set up in action. At 3 psi Ambient temp is 65 F On keg at 65. OG 1.046 Other 68 still cooling 1.048 Both pitched with US-05

Thanks Tom, I will keep that in mind. I was going to try the idea you had in your sketches with the copper cap, but hadn't thought about adding some type of spacer, I'll leave them off. Thanks for taking the time to post your experiences. Today is brew day here, I will add my experiences as the...

Code please.

Spunding Valve

My equipment

Got my parts in today, pressure testing, checking pressure changes per turn of knob. Big thanks to Wortmonger, 1MadScientist, Tegra, Poindexter, Kaiser, and everyone else that has contributed to this thread. I heard about spunding valves from a Home Brewing friend of mine in Germany and did a...

Well Done!

Will do. Thanks again.