Recent content by breew

This is ava in Jasper Indiana at the Jasper hardware store.. They also mail it.

Well got a place where one can upload there own pages. Not have to do them from the site .. this is the start and still working on it.. sorry for the layout its not done yet. http://saberbeast.fortunecity.com/Index.html <parts list and the how too as it gets made>

Working on the pages and pictures now .. Edit got the system up , no tap still but sealed it and it holds pressure nicely. Trying to find a place that lets you upload web pages <ie free hosting with no domain> i can get the web server to work on my system Once fully up will make a batch of...

No i haven't hooked it up :) waiting for my co2 bottles and regulator to get in <today i hope> and have to get them filled.. , need regulator in to ..but tested with bike pump to 60 psi and it worked good. no leaks that i found in mine for over the 48hours i tested and <made fizzy water> then...

What copper.. where? On the side is the gas in. There is nothing that touches the brew but pex and pet plastics for the top of the tee is beer/soda out.

Getting the parts list together. I didn't have all the numbers so have to go back to get all the costs. but over all it was a heavy sch80 tee threaded 1/2 fip and 2x 1/2 fip to 3/8 compression fittings. 1 30 inch pex water tube <the long gray tube from a toilet wall valve to tank,<the 30 was...

I had to get the TAD bottles and heavy caps from Mountain Homebrew, you want the keg cap i think it was on page 2 near the bottom.. for 3 somthing.. <not violating anything i hope mentioning where i got it> this http://mountainhomebrew.com/tap-a-draft6literbottle.aspx there now amber and come...

Also there is the heavy duty TAD caps. that have a true gasket in the top they seal good thats what i am using for the TapCap. PET bottles do allow some o2 in to the bottle but with a good seal and carbed it should last a lot longer then the tin plate mini kegs as they tend to rust if the...

just a follow on note.. the tee is heavy sch80 , all solder is silver solder and fittings are yellow brass not red. the main tube is pex. the shrader valve and gas connect are a/c fittings . I can pull the shrader connect and gas stays IN the bottle. letting me move the gas around to what will...

http://i1023.photobucket.com/albums/af351/saberbeast/Tap%20Cap%20System/WEB_Beer_0002.jpg http://i1023.photobucket.com/albums/af351/saberbeast/Tap%20Cap%20System/WEB_Beer_0003.jpg http://i1023.photobucket.com/albums/af351/saberbeast/Tap%20Cap%20System/WEB_Beer_0004.jpg The other views...

Heres the first Immage

Ok . got the parts. and got a perfect fit in the thru cap part. the cost is good and its a full push out of the bottle like a corny keg.. all parts washable and it is looking good.. waiting for regulator to pressure test the whole thing. Parts used are at the local home store so its easy to get...

Well NPT thread stinks. And finding G 1/4 BSPP fitting are one not ava. or two 20 bucks for them need to find a place to order them without the ungawdly cost.

I am working on a different adapter for the tap-a-draft system. just testing it now and working with a air conditioning company to help make it a DIY project with cost and easy to clean in mind. The idea isn't to use the 8gram CO2 carts but a simple paintball tank of 20 or 24 oz. This will be a...