Well, I'd build some sort of stand and turn the freezer the same way as a chest freezer. Just make sure the hot side coil (if there is one on the back side of the freezer) isn't enclosed so it can release the heat properly. You're risking far less this way (when it is a useless thing now) than...
+1 on both crash cooling and gelatine adding. I used only primary fermenter and fermented for about 10 days at 17-18°C (63-65°F) then added a tablespoon of gelatine, crashed it to 4-5°C (40-41°F) and let it sit for about a week. Since I bottle, I racked it to a bucket, added 135g (4,75oz) of...
Thanks, The Pol at least one who understood what this thread was about. Not about being green by all means necessary, but rather about what makes the brewing process more efficient and possibly green. If you are sceptic i don't mind. It wasn't the purpose of this thread to discuss the global...
I got inspired by EdWorts Recirculating Ice Water Chiller and decided to start this thread. I hope that every one would agree with me on the fact that homebrewing can be really resources wasting. Everyone can brew with gallons of waste water, kilowatts of wasted electricity, pounds of burned...
Ok, I know that it's been a while but i've been a bit busy. But my bottle washer and sanitizer is done. :ban: I had a little trouble finding the right sized tub. I cut an opening (didn't have proper tools so it looks really nasty :o) at one side then glued a little plastic bucket/pot thing there...
Hi, this is a great idea but i'd like to point out something. Isn't the epoxy toxic? I just took a look on my tube of epoxy and it said a ton of warnings. I would be aware of using anything that is not rated as food safe especially at elevated temperatures. Other than that I like the idea of...
I have tried it on shower outlet and it worked ok. I had to squeze the middle of the nozzles so i got same height spray from all nozzles. Here is the photo:
And about the scratches. Yes, there is a chance but by paying a little attention when putting bottles on the nozzles you should be ok...