Recent content by BlichmannEngineering

Mirilis, that is likely the issue. We are doing final testing on a new material and a couple geometry changes that will tolerate cavitation better. Will post an update when available. John B

jyorger that is exactly what we believe to be the problem - lack of lubrication from cavitation. We are working on improving the flow though the shaft area and make the impeller more tolerant of cavitation. Believe we will have parts to test late this week. John B

Hello all. John Blichmann here. Just got notified of this post and have had a few people notify us of this issue directly. My personal apology to those having trouble with their pumps. We are comitted to resolving it as quickly as we can so please reach out to us at...

If anyone receives leg extensions without threaded holes for the retaining bar they're the TopTier burner leg extensions. If you happen to have this issue email us at [email protected] All HellFire burner leg extensions should come with threaded holes for the retaining bars and...

The HellFire natural gas conversion kit comes with an orifice drilled to 5/32” instead of the TopTeir’s orifice drilled at 1/8”, and you receive a damper with about 50% more area to allow extra airflow into the burner. The casting is proprietary, and the burner was completely...

If you didn't get one email [email protected] and we'll hook you up.

A new shipment is going out this week.

If you receive that message using the offer code and get that message it is simply a glitch. We've had a handful of those. Please contact us on our web page (bottom of home page) and we will get you hooked up. Sorry for the trouble.

Repeat of prior post now deleted: If you have a RIMS-Rocket please inspect the plug hole for a burr or sharp edge. This edge is causing the scraping and must be removed. Please contact us at the link below and we will take of that issue for you. If you are unhappy with the product we will...

Thanks Bill! As I mentioned above - didn't think there was anything going on. Looks like coincidence as we suspected. John

Don't worry guys - I'd be as pissed as you if I were in your place. Looking at it from your side I can see where this looked like a total scam. I don't think I'm smart enough to pull something off as masterminded as that! Of course I'd need freakin sharks with freakin laser beams on their...

OK - I talked to the company that did the promotion for us (great local company) and their only thought is with the freebie sites making a signup with tracking linked to our site. I honestly don't know how all this stuff works, but it is getting pretty creepy. They have done a lot of similar...

Well, I'm not sure either. I certainly didn't give any of that out. Did you sign up directly on our page, or did you route through one of the freebie sites? I will say that a portion of the freebie sites were actual homebrewers so I can't just toss them all out. I'll follow up with the...

Hi all - John here from Blichmann Engineering. First, I would NEVER sell or give these email addresses to ANYONE. I hate getting that stuff myself and it certainly isn't a good business move either! Second, I really apologize for how quickly this ended. We were going along fine for the...

Well, that is where most of the cost is. And we don't have that set up for our retailers to order directly. By the time we special ordered through a retailer it may not be any cheaper than buying the whole thing. I guess I'm a bit confused by the cam-lock issue. Is that a 1/2" NPT thread...