adpostel's latest activity

A probe that is slightly pressing into the side of the grain bag that close to the kettle wall is not really going to give your system...

So without wanting to drill another hole in the kettle, should I just add a T fitting with thermowell just after the ball valve? And...

So after some more reading, I can do full volume BIAB mashes in my 10 gallon kettle up to about 10% ABV... For anything more than that...

My 2 cents: For the probe, get a shorter probe/thermowell. I've had to do this on my setup and a shorter probe - preferably one with...

Well, I guess the answer to my question is gonna be to mash in my eKettle while recirculating the mash for temp control and then figure...

I completely agree with this in that whether you do full volume or sparge will likely end up being personal preference overall. I also...

Better is subjective, all things considered. Better in terms of efficiency, sparging is likely better. For overall ease of process...

So is a full volume mash vs a batch sparge or pour over sparge better? When I mash in my cooler MT with a bag, I always just pull the...

Another pic with element installed...

Here is the inside of my kettle...

So I went ahead and bought the false bottom and wilserbag from Brew Hardware.... I'm leaning toward brew in a bag... My temp probe is...

So I recently picked up a 10 gallon electric fired brew kettle with controller. I was originally thinking I just wanted to go electric...

That is good to know... I have a few of those on my current controller, so I think I'll use that... I'll go with the PID Controller...

If space is a concern, there's no need for the big 22mm lamps that are common on various builds. Something like this (in 110 or 220 as...

Yes they both do the same. I have 2 separate 120v circuits and wanted big red light confirmations when either element is firing. Yes, it...