szap

Only issue I've found a problem with is the 10.5 foundry immersion cooler is not tall enough to reach a 2.5 or 3 gallon batch. If you...

I clean with oxiclean so shouldn't be the cause. I am using Briess grain. I've never seen or experienced anything like this.

I have used pilsner out of this bag several times before without problems. I buy bulk grain from the local craft brewery. I did taste...

It dried out. Did not settle.

i have had that happen with pilsner malt just not to that big extent. i usually scoop it out. but i dont think it matters. . its not...

Your question made me think. The only thing different is the batch of RO water from the local big ice machine.

I've no idea. I've never used pilsner malt. I have heard that some have more issues with it foaming more during the boil. Not during...

Today I brewed a smash IPA. Grain was 12lbs of pilsner. During mash and boil the wort had a very thick foam almost meringue like. I used...

Today I brewed a smash IPA. Grain was 12lbs of pilsner. During mash and boil the wort had a very thick foam almost meringue like. I used...

Just read this post. Is this something you have experienced with the flotit because I have used it a couple dozen kegs and never...

I am a big fan of the flotit. I dry hop in my keg and have never had a problem with gunk passing through the float and I have poured...

Totally agree. This business does fill tanks with a pump but they have to send them to their HQ so the tank is gone for at least a week...

I have been refilling 5 lb tanks from a twenty lb tank for several years now. I have a siphon in the 20 lb tank so I don't have to flip...

You can even shave a few of @FloppyKnockers steps down by getting a 20lb CO2 tank with a siphon tube. Then you can get liquid out...