• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group
Yakima 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The wall between the bar and bathroom with Reflectix in place. Note the outlet inside the kegerator. This has a switched outlet for the rope lights and an always-on outlet in case I need a fan in there.
Water supplies and sink drain. Rope light is plugged into the switched GFI protected outlet inside the bar.
FRP pebbleboard on the inside front of the bar.
FRP pebble board has been applied to the wall between the bathroom and kegerator. Plumbing is finished there with a drain for the sink and water supplies. Reflectix is in place for the front wall of the bar. Most parts of the bar have, going from outsi
The wall between the bar and bathroom with Reflectix in place. Note the outlet inside the kegerator. This has a switched outlet for the rope lights and an always-on outlet in case I need a fan in there.
Moonpile

The wall between the bar and bathroom with Reflectix in place. Note the outlet inside the kegerator. This has a switched outlet for the rope lights and an always-on outlet in case I need a fan in there.

The wall between the bar and bathroom with Reflectix in place. Note the outlet inside the kegerator. This has a switched outlet for the rope lights and an always-on outlet in case I need a fan in there.
Click to expand...
There are no comments to display.

Media information

Album
BarBuild
Added by
Moonpile
Date added
View count
208
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top