• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group
Brewer's Friend 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
placed couplings in, supported from fridge compartment and sprayed expanding foam insulation back in, be careful as the foam sticks to everything, you'll see later pics where the foam is still stuck to the pvc
moved kegs out so you can see the manifold mounted in back. Just got a secondary regulator and gonna have the 6 cut down to 2 3ways so i can run high and low
put back tray, 4 lines running through to taps. 3 beer and one pop
drilled through hole for CO2 line. IMPORTANT - I drilled from the inside first, (in case I ran into freon lines, the outside wouldnt look like swiss cheese as I hunted for a place without the lines) just going through the plastic and feeling around in the
attached board to shelf brackets for mounting 6way manifold
removed drawers and replaced with a shelf to give extra clearance for kegs and QC/hoses
krugvoll

placed couplings in, supported from fridge compartment and sprayed expanding foam insulation back in, be careful as the foam sticks to everything, you'll see later pics where the foam is still stuck to the pvc

placed couplings in, supported from fridge compartment and sprayed expanding foam insulation back in, be careful as the foam sticks to everything, you'll see later pics where the foam is still stuck to the pvc
Click to expand...
There are no comments to display.

Media information

Album
buildingmykegerator
Added by
krugvoll
Date added
View count
536
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top