Is the temperature controller outside the fridge? is yes, do you have an extra hole to pass the probe to the inside?
B
Buford
I hang the controller on a screw behind the fridge. The probe runs into the fridge by way of the drain hole at the middle of the back bottom of the fridge, over the compressor hump under the cold plate. I pulled the rubber plug thing out to make the hole bigger in case I want to run a gas line through there later. You can pull the drain tray over the compressor behind the fridge off to have better access to the hole to get the probe through, but put it back on the fridge once you have done this so condensation doesn't drip on the compressor.
