• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Co2 pressure can range between 650-1200psi.  Here is the attached On/Off valve, 1/8" NPT x1" Nipple, Primary High Pressure Regulator, ASA and close nipple.  Remember to turn the primary reg down to about 100psi as the Secondary reg has a maximum
Jeepninja

Co2 pressure can range between 650-1200psi. Here is the attached On/Off valve, 1/8" NPT x1" Nipple, Primary High Pressure Regulator, ASA and close nipple. Remember to turn the primary reg down to about 100psi as the Secondary reg has a maximum

Co2 pressure can range between 650-1200psi. Here is the attached On/Off valve, 1/8" NPT x1" Nipple, Primary High Pressure Regulator, ASA and close nipple. Remember to turn the primary reg down to about 100psi as the Secondary reg has a maximum operating pressure of 150psi. Beer is dispensed at about 12psi and the Planet Eclipse High Pressure Regulator is a high flow reg which should have no problems feeding this.
There are no comments to display.

Media information

Album
PaintballBeerRegulator
Added by
Jeepninja
Date added
View count
126
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top