• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group
Brewer's Friend 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
And mocked up in the mash-tun (without false bottom for better picture) already tested with two batches and very successful.

And mocked up in the mash-tun (without false bottom for better picture) already tested with two batches and very successful.

  • 0
  • 0
Underneath shot of the Sparge Arm, can vaguely see the holes that required a trip to our local home improvement store for a drill press...

Underneath shot of the Sparge Arm, can vaguely see the holes that required a trip to our local home improvement store for a drill press...

  • 0
  • 0
The new Stainless Sparge Arm thanks to our engineering half of our team! The tubing is actually 3/8 inch instead of half, had it on hand and with the low flow rates required for sparging we figured it would work just fine, and it does.

The new Stainless Sparge Arm thanks to our engineering half of our team! The tubing is actually 3/8 inch instead of half, had it on hand and with the low flow rates required for sparging we figured it would work just fine, and it does.

  • 0
  • 0
New pic of the system as it is now, and functional. Notice we had to turn the pump around and build a little shelf for it. I don't know much about pumps, but it did not work the other way around, someone mentioned rotating the head, but this works, so it

New pic of the system as it is now, and functional. Notice we had to turn the pump around and build a little shelf for it. I don't know much about pumps, but it did not work the other way around, someone mentioned rotating the head, but this works, so it

  • 0
  • 0
Pretty much finished with our 15" false bottom! Needs some finishing touches and some feet for support still.

Pretty much finished with our 15" false bottom! Needs some finishing touches and some feet for support still.

  • 0
  • 0
Mounting the hinges to our false bottom.

Mounting the hinges to our false bottom.

  • 0
  • 0
Our stainless hinges we've been waiting for...

Our stainless hinges we've been waiting for...

  • 0
  • 0
Semi-Finished product? Finished as of the 1st build day, ha... more needs to be done.

Semi-Finished product? Finished as of the 1st build day, ha... more needs to be done.

  • 0
  • 0
Mash Tun with both 1/2 inch ports drilled, and now drilling for it's thermometer.

Mash Tun with both 1/2 inch ports drilled, and now drilling for it's thermometer.

  • 0
  • 0
Drilling the hole for the Mash Tun's ball valve.

Drilling the hole for the Mash Tun's ball valve.

  • 0
  • 0
Sure does look good with that pump mounted though...

Sure does look good with that pump mounted though...

  • 0
  • 0
Okay, we know it's coming so I'll just say it first...How many Aggies does it take to mount a pump?? Apparently, on this day, it took three..

Okay, we know it's coming so I'll just say it first...How many Aggies does it take to mount a pump?? Apparently, on this day, it took three..

  • 0
  • 0
pale_ale-froman

TheBuild

Our build of our wooden 2-tiered All-Grain brew system.
Click to expand...
There are no comments to display.

Album information

Album owner
pale_ale-froman
Date created
Item count
25
View count
422
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

pale_ale-froman

pale_ale-froman

Media items
0
Albums
0
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top