• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group
SSBrew - 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A closer look at the top.
And another picture of the back, and you can also see the side where I had to remove the railings for the shelves in order to fit the 2 cornies. Also, note that I moved the temp controller to the back, and removed the light and cut the plastic out of wher
There you can see the 5lb aluminum tank sitting in the back ledge with enough clearance for 2 regulators.
Kegerator with the 2 cornies inside. They do fit, but as you can see it's very tight. I also had to remove the plastic form the door as you can see it replaced by a white painted acryllic.
A closer look at the top.
This is a pic of the finished kegerator complete with a dual tap tower, drip tray and a granite top that I installed.
L

A closer look at the top.

A closer look at the top.
Click to expand...
There are no comments to display.

Media information

Album
Kenmore46cuftkegerator
Added by
luisfrancisco
Date added
View count
155
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top