Arizona Ss Brewtech 1/2 bbl Conical - BREWMASTER EDITION and 2" RIMS Tube

$800 - CHRONICAL 1/2 BBL FERMENTER - BREWMASTER EDITION

Downsizing need to sell.

Will deliver to Phoenix, depending on when I can get up there.

17 GALLON CAPACITY (plus 1.3 gals in lid)

Website Description:
•304 Stainless Steel
•Custom Ss squeeze trigger butterfly valves
•3" TC port on lid/ top for dry hopping/CIP
•Includes 3" TC clamp, gasket, 3" TC cap
•3" cap on lid has 17 mm hole for airlock / blow off
•Optional Stainless Steel blow-off cane (shown)
•Optional 3" TC CIP spray ball attachment
•Standard sampling valve included with unit
•304 Ss chiller coil weldlessly mounts inside unit!
•Chiller coil is included standard in the kit !
•Neoprene insulation jacket standard in kit!
•Allows you to retain domed lid for transfers
•1.5" TC flanges on racking/ dump ports
•Rotatable TC racking arm included
•Comes w/ weldless thermowell
•Includes LCD temp gage standard
•Sanitary welds and beautiful polish finish!
•Brewer's grade silicone gaskets
•Electrically etched volume markings
•Volume markings in both gals / liters
•Threaded inserts on leg bottoms (3/8")

http://www.ssbrewtech.com/collectio...nical-half-bbl-fermenter-brewmaster-edition-1


Homebrew 2" Tri Clover Compatible Tri Clamp RIMS Tube

Never used, paid $300 new.

Can possibly deliver to Phoenix.

Company's Website Description:
This is the 2" version of our RIMS tube. Perfect for a little more room when using fold-back style elements or to just have more room in the tube to slow the wort flow across the element a little bit.

The Brewers Hardware 2" Tri Clover Compatible clamp-based RIMS Tube is designed to maintain a constant mash temperature. It can also be used for step mashing and also mash-out. Unlike any other RIMS tube on the market, it features all Tri Clover Compatible fittings for easy disassembly and cleaning. When disassembled, you can pass a brush clean through the entire tube body. The inlet and outlet feature 1" Tri Clover Compatible ferrules which will accept our barb or NPT Tri Clover Compatible fittings. The body diameter is 2" OD tubing with a 1..875" ID, providing for an reduced flow rate across the element to reduce any possible wort scorching as well as more room for larger fold-back type elements. A 16" overall length of the RIMS tube itself allows for almost any heater element to be installed and a unique 2-piece design allows the inlet and outlet to be rotated to any angle from each other that you want.

The available element end fitting is threaded with 1" NPS threads to match almost every water heater element available at any home improvement center. Similar products use the easier to find NPT threads which will almost always bind with the element before sealing.

Base price before configuration Includes:
• 1 - 2" Tri Clover Compatible 2-piece RIMS Tube
• 5 - Silicone Gaskets
• 5 - Tri Clover Compatible Clamps

A water heater element and temperature controller are required but not included. Your system will also require a pump.

 

Willing to ship conical?

 

I am willing to ship the conical; however, cost of shipping will be the responsibility of the buyer and is not included in the $800.

 

Will you give quotes on shipping ?

 

Interested in RIMS tube parts.

 

Did you sell the fermenter?