Show Me Your Wood Brew Sculpture/Rig

[BFD_BrewGeek]

He may be talking about the line coming off the pump. Surely to God thats stainless and not galvanized! I hope and pray you aren't running wort that you plan to ferment and drink through galvanized pipe.


Sent from my iPhone using Home Brew

Uhmmm...yeah...no...no galvanized pipe at all...especially not in contact with the wort!

 

[LandoLincoln]

He may be talking about the line coming off the pump. Surely to God thats stainless and not galvanized! I hope and pray you aren't running wort that you plan to ferment and drink through galvanized pipe.


Sent from my iPhone using Home Brew

I was talking about this picture specifically:

Two of the connections to that T are brass, which is fine, but the third connection looks like it's just a copper fitting.

That T looks like a regular galvanized T, not black iron. But either way, I don't think that copper should be connected directly to galvanized or black iron without a brass fitting in between.

 

[aboantopick]

10 gallon pot pumps to 10 gallon mash cooler and 5 gallon sparge tank. No more lifting!

 

[MX1]

Here is a finished pic of mine

 

[fusa]

Finished my single tier wooden stand. I'm still working on the control panel. I've used the new stand several times, and it is much easier than the 3 tier stand I originally had.

 

[RyanSweeney]

^^^ Really like the casters on the end so you can store it vertically!

 

[fusa]

I had planned on leaving on my deck, but the landlord threatened to evict me unless I removed it. I store it inside next to the door. I usually brew on Sundays now so they don't get offended by the stand.

 

[Gitmoe]

Those castors are brilliant. I might have to steal that for my wooden single tier. I need it out the way and have been struggling with what to do with it. Tucked further in the corner would be great. It weighs a ton though. Not sure how easy standing it up would be. Any tips on getting it vertical?

 

[NathPowe]

Any tips on getting it vertical?

Just messing with you man.

 

[TobyG]

Those castors are brilliant. I might have to steal that for my wooden single tier. I need it out the way and have been struggling with what to do with it. Tucked further in the corner would be great. It weighs a ton though. Not sure how easy standing it up would be. Any tips on getting it vertical?

"Give me a lever long enough and a fulcrum on which to place it, and I shall move the world." - Archimedes

 

[Hunky]

Mine - still planning but using what I got. Haven't quite got the pump incorporated yet but hope to use it for various tasks like sparging, whirlpooling, etc.

 

[fusa]

Those castors are brilliant. I might have to steal that for my wooden single tier. I need it out the way and have been struggling with what to do with it. Tucked further in the corner would be great. It weighs a ton though. Not sure how easy standing it up would be. Any tips on getting it vertical?

Mine isn't really hard to get vertical. Biggest problem is being sure to grab the 2x4's or 4x4's. I just squat, and stand up, then its mostly vertical.

 

[BeerGrylls]

Those castors are brilliant. I might have to steal that for my wooden single tier. I need it out the way and have been struggling with what to do with it. Tucked further in the corner would be great. It weighs a ton though. Not sure how easy standing it up would be. Any tips on getting it vertical?

I'll bet that's got a bit to do with the placement of the casters. If you look, the ones closest to the bottom aren't close to the edge. That means they won't contact the ground until it's close to upright.

 

[November]

Here is my wood stand.

With the tanks.

It is knotty alder on a pine carcass with walnut oil/linseed oil and spar urethane. Done with hand tools, planes, handsaws etc...

Almost done. I just need to add a few more fittings and valves.

 

[BeerGrylls]

Oooohh... Shiny. I like.

 

[wilserbrewer]

November,

That rig is such a piece of crap! I so wish it was in my basement tomorrow morning!

Absolutely beautiful....thanks for posting, very nice work!


Wilserbrewer
Http://biabbags.webs.com/

 

[aboantopick]

10 gallon pot pumps to 10 gallon mash cooler and 5 gallon sparge tank. No more lifting!

\

I used a cheap 22$ pump that has plenty of umph to reach at least 6 ft of head. I use it to pump hot water mostly but I can pump wert also. The pump is food grade and temperature compatable (212f). I plan on putting a switch but he battery charger clamps make it easy to just clip on and the charger sits on the stand. http://www.amazon.com/gp/product/B00DWORE5A/?tag=skimlinks_replacement-20
My water filter is just hooked the a faucet for pressure, just restrict the flow slightly. RV drinking water hose, culligan filter housing, dupont carbon filter.

 

[Dustbowl]

I just built this guy today. It's the first of three independent platforms of what will be a 3 tiered system.

 

[jiggs_casey]

 

[Rcole]

.

 

[Rcole]

Here is my wood stand.



...


It is knotty alder on a pine carcass with walnut oil/linseed oil and spar urethane. Done with hand tools, planes, handsaws etc...



Almost done. I just need to add a few more fittings and valves.

November- Brilliant woodworking skills!

This display of craftsmanship is the whole reason behind building a wood stand. Otherwise, just stack some milk crates.

Nice work.


Sent from my iPad using Home Brew

 

[Rcole]

.

 

[November]

November- Brilliant woodworking skills!

This display of craftsmanship is the whole reason behind building a wood stand. Otherwise, just stack some milk crates.

Nice work.


Sent from my iPad using Home Brew

Thanks. It was easier and cheaper than most people might expect. The whole stand was about $250 and I used a handful of tools (miter saw, 28" rip saw, 26" crosscut saw, hand drill, 1" chisel, rasp, #6 fore plane, hammer, nail set, marking gauge). It was pretty easy, no crazy cuts or unusual techniques. Just took a while, about a month to build.

 

[Danno81]

Sexxssqg zedsads


On tap: arrogant bastard clone no3
Primary 1 sublimely self-righteous clone no1


Primary 2 ginger lemon wit


1gal #1 arrogant bAstard with scorpion pepper

1 gal #2 self-righteous w/ *undecided*

 

[nosnhojm20]

Here is mine.

9 gallon kettles. E-herms

 

[flybigtone]

I just finished my wood brew rig. 5 gal setup, with 2 cheap Chinese eBay pumps, homemade control panel and plate chiller. Test run next week!

 

[BayerischBier]

I just finished my wood brew rig. 5 gal setup, with 2 cheap Chinese eBay pumps, homemade control panel and plate chiller. Test run next week!

Looks great. Can you enlighten us about the pumps?


Sent from my iPad using Home Brew

 

[n240sxguy]

What size camlocks are those?


Sent from my iPhone using Home Brew

 

[flybigtone]

Looks great. Can you enlighten us about the pumps?


Sent from my iPad using Home Brew

Here is the forum for the pumps. It's a lot of info to weed through, but the last few pages have good info. They are food grade 12vdc pumps made in China that I purchased on eBay for $25 each. They don't have tapered threads, so I had to use a significant amount of Teflon tape to make the cam locks leak proof. Also, they aren't self priming. I did a test run with just water and so far so good.
https://www.homebrewtalk.com/f11/cheap-compact-wort-pump-375904/index89.html

The cam locks are 1/2" SS high flow from bargainfittings.com

 

[241]

Getting lots of ideas while looking at you guys' wood.