Rogue Chocolate Stout Clone | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice
Corona Virus

Rogue Chocolate Stout Clone

Discussion in 'Recipes/Ingredients' started by Prime, Sep 25, 2009.

 

  1. #1
    Prime

    Well-Known Member

    Posted Sep 25, 2009
    I was wondering if anybody had a good Rogue Chocolate Stout Clone recipe for extract. I tried searching, but I didn't come up with anything.

    Thanks!
     
  2. #2
    wildwest450

    Banned

  3. #3
    Prime

    Well-Known Member

    Posted Sep 25, 2009
    Thanks, but I was hoping someone had some experience with a recipe. Kind of like to know how it turned out and such.
     
  4. #4
    tandpbrewing

    Well-Known Member

    Posted Sep 26, 2009
    there was a clone recipe in an issue of zymurgy a few months back (the one with Pliny in it). I don't have a copy, but maybe someone here does.
     
  5. #5
    FastEddie

    Member

    Posted Sep 26, 2009
    This recipe is actually a reprint from Sep/Oct '03 issue of Zymurgy...

    5 U.S. gallons (19 liters)
    O.G. 1.060 (15 P)
    IBU: 69

    11.0 lb. Great Western 2-row pale malt
    .5 lb. 120L Crystal Malt
    .5 lb. Chocolate Malt
    .5 lb. Rolled Oats
    3.0 oz. Roast Barley
    1.5 oz. Chocolate extract (in secondary)
    1.0 oz. Cascade pellet hops, 5% a.a. (90 mins)
    1.0 oz. Cascade pellet hops, 5% a.a. (30 mins)
    1.0 oz. Cascade pellet hops, 5% a.a. (knockout)
    1.0 tsp. Irish moss (20 mins)

    Wyeast 1764 Pacman Ale Yeast (If available) or White Labs WLP001 California Ale or Wyeast 1056 American Ale.

    Mash at 150*F for 60 mins. Sparge at 175*F to collect 6.5 gallons of pre-boiled wort. Boil 90 minutes. Coll to 60*F and pitch yeast. Ferment at 60*F for one week. Siphon into secondary at 50-55*F onto chocolate extract and hold until fermentation is complete, then package and condition.

    EXTRACT PLUS SPECIALTY GRAINS:

    Steep specialty malts in 150*F water for 20 mins. Strain, add 7.5 lbs. Light LME and proceed with 60 minute boil adding hops at specified intervals.
     
    Gothic_Horror likes this.
  6. #6
    corwin6654

    Well-Known Member

    Posted Sep 19, 2010
    I know this thread has been dead for awhile, but i was looking at brewing this soon. If I do extract, the directions say "boil 60 min, add hops per schedule", but the 1st hop addition is at 90 min on the all grain version. Do I just add it at 60 min instead? Also, it says ferment @ 60 degrees for 1 week, then siphon to secondary on top of the chocolate extract and hold until fermentation is complete. Shouldn't all of the fermentation be done in the primary? I would be racking it off of the yeast cake from the primary, so it wouldn't be fermenting much in secondary, would it? Thanks for helping a noob. :mug:
     
  7. #7
    Tiredboy

    Well-Known Member

    Posted Mar 6, 2012
    It's been dead for even longer now!
    One question from a new brewer, if I do extract, are the speciality malts the crystal, chocolate, oats and barley?
     
  8. #8
    feinix

    New Member

    Posted Sep 5, 2015
    islandhopper likes this.
  9. #9
    jplowe

    Supporting Member  

    Posted Jul 25, 2018
    I'm brewing this on Saturday. Has any one done this recipe before?
     
Draft saved Draft deleted

Share This Page

Group Builder