Proper Yeast Starter Usage | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Proper Yeast Starter Usage

Discussion in 'Fermentation & Yeast' started by TommyTaps, Sep 4, 2012.

 

  1. #1
    TommyTaps

    Member

    Posted Sep 4, 2012
    So im doing my first Dunkelweizen and 24 hours prior i made a starter. I went with Wyeast 3068 Weihenstephan Weizen. I kept at 64 deg. and the starter looked great. My only concern was when i piched to the primary i gave the starter a good shake and swirl, but could not get the thick bottom/trub to loosen. Rather than scraping it loose i just pitched whatever came out and discarded the rest. I just wanted to get some feedback on wether you must use your entire starter, or whatever you can get out.

    * checked Dunkel 12 hrs after pitching and has a very healthy fermentation :)
     
  2. #2
    stratslinger

    Well-Known Member

    Posted Sep 4, 2012
    Ideally, you want to get all of it - that thick bottom/trub was the bulk of your yeast! What might have worked better for you was to decant off a good portion of the fluid (not all!) that was in the starter container, then swirl what was left vigorously enough to get all of that yeast cake up into solution. Maybe try that next time?
     
  3. #3
    mtyquinn

    Well-Known Member

    Posted Sep 4, 2012
    Yeah, you want that good stuff in the bottom. Shake harder, get that stuff up into solution.
     
  4. #4
    TommyTaps

    Member

    Posted Sep 4, 2012
    Crap, i knew it felt wrong to discard :( should i get another pack and pitch into the dunkel?
     
Draft saved Draft deleted

Share This Page

Group Builder