Outdoor Slop Sink | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Outdoor Slop Sink

Discussion in 'Equipment/Sanitation' started by DeisBrewing, May 3, 2014.

 

  1. #1
    DeisBrewing

    Member

    Posted May 3, 2014
    So as we all know, brewing beer requires a lot of cleaning. I was sick cleaning everything on the ground with the water hose so I built this really quick, easy and really effective outdoor slop sink. I used a storage bin as the sink and built a wooden frame around it. I even attached plumbing right into a sewer drain coming out of the house. I also took my RO unit to it. The whole project only cost about $50!

    20140503_135909[1].jpg

    20140503_135902[1].jpg

    20140503_135853[1].jpg
     
  2. #2
    Vetter

    Well-Known Member

    Posted May 4, 2014
    Great idea!
    I am in the process of putting a old utility sink in my front porch. But I will just have it drain outside in the garden. with out a trap, so I can use it in the winter too. You probably don't have to worry about that in Texas.:mug:
     
  3. #3
    flars

    Well-Known Member

    Posted May 4, 2014
    Nice. Add a lower shelf to put small items on while cleaning up.
     
  4. #4
    DeisBrewing

    Member

    Posted May 4, 2014
    Thanks. I do love the weather down here :) I have a water tight bin to put all the cleaning supplies in.
     
  5. #5
    Yesfan

    Well-Known Member  

    Posted May 16, 2014
    I had some free time today, so I decided to make me a sink. All I have in it is the cost of the tub.



    [​IMG]


    I still need to put in a drain. I'm kind of leery about doing that. I'm afraid the plastic will start splintering when I drill the hole in the tub.


    EDIT: Thanks for the idea Deisbrewing. I found this topic a few months back when I was looking for outdoor/utility sink ideas.
     
  6. #6
    flars

    Well-Known Member

    Posted May 16, 2014
    The plastic of the tub you have does splinter. Melting a hole with a soldering iron would work better.
     
  7. #7
    Yesfan

    Well-Known Member  

    Posted May 16, 2014
    Thanks so much. I'll give that a try. I guess I could just draw a hole with a Sharpie using a templet and just use the soldering iron to work my way to the hole's size?


    Or is there an easier way?
     
  8. #8
    flars

    Well-Known Member

    Posted May 16, 2014
    I've used the technique to cut holes in plastic and styrofoam. Just don't use to much pressure. Let the tip melt its way forward.
     
  9. #9
    DeisBrewing

    Member

    Posted May 18, 2014
    Looks good Yesfan! I like how your bin is shorter than mine. That makes it easier to get stuff in and out. My bin split when
    I was fitting the drain to it because the hole wasn't big enough and I pushed to hard to get the drain in. Duct Tape! I used an exacto knife to cut the hole and that worked well.
     
Draft saved Draft deleted

Share This Page

Group Builder