Love TS2

I can't get my love TS2 into heating mode. Are there some models that don't have that capability?

 

Here is a photo of the label.

 

You will want to check the service manual, but I believe that your controller will only control one output. http://www.dwyer-inst.com/PDF_files/TS2_iom.pdf

The TSS2 has dual temp control options (see service manual). http://www.dwyer-inst.com/PDF_files/TSS2_iom.pdf

To double check this info, you can email their tech department. [email protected] They are very helpful and quick to respond.

 

I figured it out. The 8 seconds that the manual tells you to hold the set button is more like 15. Got it set up and controlling a heat lamp now.

 

to be clear, you switched from cooling mode to heating mode... you aren't running 2 devices at the same time, right?

 

That is correct. Just a heat lamp for right now. The TS2 can only do one at a time. Luckily my basement is sitting right about 51 degrees, so a small clip on light fixture in an insulated box is all I need to keep it right at about 65 degrees.