Is this a good starting point for pot and burner? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Is this a good starting point for pot and burner?

Discussion in 'Equipment/Sanitation' started by LaneStreet, Jul 15, 2009.

 

  1. #1
    LaneStreet

    Active Member

    Posted Jul 15, 2009
    Last edited by a moderator: Oct 23, 2018
  2. #2
    BierMuncher

    ...My Junk is Ugly...  

    Posted Jul 15, 2009
    Perfect.

    7.5 gallons is plenty capacity for full 5-gallon boils. Just be watchful early on as it can still boil over.
     
  3. #3
    stevea1210

    Well-Known Member

    Posted Jul 15, 2009
    It will work great. My first outdoor setup was a 30 qt pot also.

    I reccomend investing in a bottle of fermcap if you are using a 30 q pot, as it WILL boil over.
     
  4. #4
    Buffman

    Well-Known Member

    Posted Jul 15, 2009
    It will work fine. Be sure to boil a full pot of water before using it for wort to oxidize the aluminum. You may soon find, like I have with my 36-quart pot, that you wish you'd bought a bigger pot. Just watch out for boilovers at the hot break and hop additions. I cut the heat a little at those times and avoid boilovers, but it's a drag having to pay that close attention.
     
  5. #5
    LaneStreet

    Active Member

    Posted Jul 15, 2009
    Yeah, I was concerned that the pot was a little small. But, I am having trouble finding anything with a bigger pot without a huge jump in price. I may just start here and try fermcaps and watch for the boil-overs.
     
  6. #6
    Catt22

    Well-Known Member

    Posted Jul 15, 2009
    Last edited by a moderator: Oct 23, 2018
  7. #7
    BigCask

    Active Member

    Posted Jul 15, 2009
    The pot looks fine, but the burner looks questionable. The guard rail on the burner look like it is limited to using that pot or other small (relatively speaking) diameter pot. IMO you want a burner that could hold a bigger pot in the future. Before long you know you'll want to do 10 gal batches.

    I realize this may break your budget but take a look at something like this:
    Amazon.com: Bayou Classic SP1 Jet Cooker: Patio, Lawn & Garden

    Or this:
    Amazon.com: Bayou Classic SP10 High-Pressure Outdoor Gas Cooker, Propane: Patio, Lawn & Garden

    -BigCask
     
    Last edited by a moderator: Oct 23, 2018
  8. #8
    LaneStreet

    Active Member

    Posted Jul 15, 2009
    Thanks BigCask I will look into those burners. I see what you mean about the burner not fitting a bigger pot.

    Do you have a suggestion for a pot to go with the other burners?

    Thanks for the help!
    Lane
     
  9. #9
    Buffman

    Well-Known Member

    Posted Jul 15, 2009
    Last edited by a moderator: Oct 23, 2018
  10. #10
    FlyingHorse

    Well-Known Member  

    Posted Jul 15, 2009
    This is true regardless of pot size. It may not be easy to do, or happen as often, but you can boil over a 5-gallon batch in a 9g pot (ask me how I know :eek:), or probably a 10g pot, or even a keggle.

    The reason I moved up from a 7.5g pot is that it allowd me the flexibility to do longer boils (bigger beers, drive off DMS, etc). To get 5.5g in the fermenter from 90-min boil, I need to start with 7-7.5g in the kettle.
     
  11. #11
    Revvy

    Post Hoc Ergo Propter Hoc  

    Posted Jul 15, 2009
    I have used the 7.5 gallon kettle from my turkey fryer for over a dozen batches so far, with no issues...like Biermuncher said, it works for most 5 gallon batches.

    What helps is getting fermcap-s foamcontrol drops, to prevent boil overs (3-4 drops/gallon). I have loaded the kettle to about 1" from the top of the kettle and had a vigorous boil and have had almost no problems with boilovers (I have had a couple flareups that through some wort up, but that was from having the boiler going way to high- Just bring the beer to a boil and backing off the gas a bit, alongside the fermcap takes care of that most of the time.)

    I also use it on my stove top brewing as well. I can get 4.5 gallons boiling in my 5 gallon pot and go take a nap between hop additions and not worry.

    [​IMG]

     
  12. #12
    BrothersBrewing

    Well-Known Member

    Posted Jul 15, 2009
    the burner is great, the pot will work,but you may want a bigger pot..make sure you turn down the heat during hop additions.boil overs will happen!
     
  13. #13
    LaneStreet

    Active Member

    Posted Jul 15, 2009
    Great information, thanks. It sounds like fermcaps are the way to go.

    I need to try and find a pot to go with the more stable burners it looks like.
     
  14. #14
    Buffman

    Well-Known Member

    Posted Jul 15, 2009
    Revvy's got a great point - I wouldn't try a full boil in there without Fermcap. And use enough - I've skimped on it before ([email protected] that I am) and regretted it.
     
  15. #15
    bendavanza

    Well-Known Member

    Posted Jul 15, 2009
    You can use a fan blowing across the top to help control the boilover.
     
  16. #16
    Revvy

    Post Hoc Ergo Propter Hoc  

    Posted Jul 15, 2009
    Yes, and other also have been successful with a simple spray bottle with water.

    There's plenty of great options with using those cheap turkey fryers with the original kettles. Someday I will upgrade to a keg, but I'm in no hurry. This has served me well for several batches.
     
  17. #17
    LaneStreet

    Active Member

    Posted Jul 15, 2009
    I have used a water bottle also, that has worked well for smaller boils.
     
Draft saved Draft deleted

Share This Page

Group Builder