I have 15.5 gallon kegs | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

I have 15.5 gallon kegs

Discussion in 'Bottling/Kegging' started by Denvel, Apr 8, 2009.

 

  1. #1
    Denvel

    Member

    Posted Apr 8, 2009
    Can I use these for anything? Can I use them like Corny kegs?
     
  2. #2
    Cpt_Kirks

    Well-Known Member

    Posted Apr 8, 2009
    They can be harder to clean, but they can be used as kegs for homebrew.

    Another use is to cut the top out of them and use them as "keggles".
     
  3. #3
    jmp138

    Well-Known Member

    Posted Apr 8, 2009
    Yeah make a keggle, cut the top out, put in a ball valve and you have a perfectly good 15.5 gallon brewpot for very little cost. They truly are the way to go, well if you can't afford a Blichman!
     
  4. #4
    HSM

    Well-Known Member

    Posted Apr 8, 2009
    Return them for the deposit.
     
  5. #5
    Denvel

    Member

    Posted Apr 10, 2009
    awesome, so you know where I can find a guide on how to do that?
     
  6. #6
    Cpt_Kirks

    Well-Known Member

    Posted Apr 10, 2009
    Tip the keg onto it's side. Use a screwdriver to push down the silver ball valve in the center of the keg. Let the pressure off. Beer can shoot several feet, so point it where you don't mind STINKY old beer spraying.

    Take a 12" piece of string. Attach a pencil to one end. Hold the other end onto the silver ball valve in the center of the keg. Pulling the string tight, and draw a 12" circle around the center of the keg.

    Take a drill, and drill a small hole INSIDE the circumference of the circle (this is a double check that all the pressure is released).

    Take a small (4" or so) angle grinder with a cut off blade and cut out the top, following the pencil line. Remove the top.

    Take a file, sandpaper, emory cloth and/or wire brush and smooth out the edge of the cut (unless you really like stitches).

    Clean that nasty thing out, and you are ready to cook. You can add a sight glass, temperature probe(s), valves, screens, filters or whatever you want at this point.

    Search around the site, and you can find pics or even videos of the process.
     
  7. #7
    chumprock

    Well-Known Member

    Posted Apr 10, 2009
    Ship them to me.
     
  8. #8
    beerocd

    Well-Known Member

    Posted Apr 10, 2009
    Can't return them for the deposit without the original reciept. At least that's the way it works around Chicago.

    -OCD
     
  9. #9
    BierMuncher

    ...My Junk is Ugly...  

    Posted Apr 10, 2009
    Yep. We're loaded with pictures of how-to's.

    Keggle_3.JPG


    And if you don't want to drill holes, just use a high tech measuring device similar to mine.
    Keggle_4.JPG
     
  10. #10
    Reverend JC

    2500 gallons year to date

    Posted Apr 10, 2009
    BM-

    Everytime I see that pic i litteraly laugh out loud. Son of a bitch, i don't think anyone can do that to a keg without purposely trying man.............I need to wipe tears from my eyes:mug:
     
Draft saved Draft deleted

Share This Page

Group Builder