How many brews per tank? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice
Corona Virus

How many brews per tank?

Discussion in 'General Homebrew Discussion' started by jbsayers, Nov 8, 2012.

 

  1. #1
    jbsayers

    Well-Known Member

    Posted Nov 8, 2012
    I am on my third brew day and am still using the same standard propane tank. How many brews do you usually get out of a tank?
     
  2. #2
    Gameface

    Well-Known Member

    Posted Nov 8, 2012
    It depends on so many things. Three is about the max I've gotten out of a 20lb tank. I use a 30lb for my HLT and a 40lb for my brew kettle. After making a make-shift wind screen/flume for my KAB4 I'm getting a good 5-6 brews out of the 40lb tank. Throw a windy brew day in there and the numbers will drop.

    Oh, I should point out I do 10gal batches in a 20gal kettle. In usually start with 13-14gal.
     
  3. #3
    Dirty25

    Well-Known Member

    Posted Nov 8, 2012
    I think I got like 10-12 out of my last tank. But that's just a 60m boil.

    I was heating strike/sparge water up off my stove
     
  4. #4
    Gameface

    Well-Known Member

    Posted Nov 8, 2012
    Dang, I'm doing horrible. I do usually fill them well before they're empty. I've had a few brew days where there's still propane but the flame just isn't as strong as normal.
     
  5. #5
    shoggoth

    Active Member

    Posted Nov 8, 2012
    I have been averaging 6 five-gallon brews per tank. I use a Camp Chef 60,000 btu burner and do all-grain BIAB with 60 minute boils. I recently decided to switch to 10 gallon batches and have so far got 1 five-gallon and 2 ten-gallon batches out of my tank.
     
  6. #6
    TopherM

    Well-Known Member

    Posted Nov 8, 2012
    I get about 12 on average on my Blichmann burner. The banjo buner element is crazy efficient!
     
  7. #7
    jbsayers

    Well-Known Member

    Posted Nov 8, 2012
    I wish the propane tank had a fuel guage. I have a spare tank so all won't be lost when one runs out but it would be nice to know in advance.

    Like I said, I have done 3 brews so far on the standard size they sell at Home Depot. I was hoping to get at least three per tank. We'll see if it dies next brew day.

    Where do you get the 40lbs tanks? I haven't seen them anywhere.

    JB
     
  8. #8
    TopherM

    Well-Known Member

    Posted Nov 8, 2012
  9. #9
    jbsayers

    Well-Known Member

    Posted Nov 8, 2012
  10. #10
    Dirty25

    Well-Known Member

    Posted Nov 11, 2012
    I have the same burner on my banjo/bayou/whatever burner. It works great and gets 6-7 gallons boiling quick.
     
  11. #11
    Gameface

    Well-Known Member

    Posted Nov 11, 2012
    Home depot.

    They sell enormous tanks at costco.
     
  12. #12
    jbsayers

    Well-Known Member

    Posted Nov 11, 2012
    Weird. Haven't seen the larger ones at HD. I'll look around.

    JB
     
  13. #13
    ajlee

    Well-Known Member

    Posted Nov 11, 2012
    I get about 6. I'm doing extract kits still so those are 60 min partial boils. I'm using the Bayou Classic SP-10.
     
  14. #14
    Wayne1

    Well-Known Member

    Posted Nov 11, 2012
    A pressure gauge will not help when it comes to propane. The pressure in the tank will remain constant until just before the tanks empties.

    The best way to determine how much propane is left is to weigh it.

    [​IMG]

    This is available from Cabela's for under $13.00. I'm sure you can find it elsewhere.

    Lowes has 40 lb propane tanks listed on their website. Pricining seems to be around $100.00. 30 lb tanks seem to about $70.00.
     
Draft saved Draft deleted

Share This Page

Group Builder