How do I avoid this? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

How do I avoid this?

Discussion in 'Beginners Beer Brewing Forum' started by JerryMac, Jul 6, 2011.

 

  1. #1
    JerryMac

    New Member

    Posted Jul 6, 2011
    [​IMG]

    Thanks!
     
  2. #2
    Seven

    Well-Known Member

    Posted Jul 6, 2011
    WOW!

    Use a blowoff tube for all brews in the future. This way the excess foam can vent safely into a bucket of sanitizer. A blowoff is an easy way to prevent messes from unexpected explosive fermentations.

    You should still be able to save this batch by adding a blowoff tube now.
     
  3. #3
    kaz4121

    Well-Known Member

    Posted Jul 6, 2011
    Agreed. A stopper with a hole for a 1/2 blowoff tube should do the trick. Just make sure the keep the tube in the bucket of sanitizer and the bucket of sanitizer BELOW the carboy level so that you won't get any suck back.
     
  4. #4
    Paymygasbill77

    Well-Known Member

    Posted Jul 6, 2011
    Is the Stopper and airlock in there somewhere or did it launch into orbit?
     
  5. #5
    TheBrewLebowski

    Member

    Posted Jul 6, 2011
    Blow off tube is a good idea. Also, that looks like a 5 gallon batch in a 5 gallon carboy. That doesn't leave a lot of room for krausen to form. Your primary fermenter should always be larger than your batch size to account for this. A 6.5 gallon carboy would have been better. The 5 gallon carboy is fine for a secondary or for smaller batches as a primary.
     
  6. #6
    TheBrewLebowski

    Member

    Posted Jul 6, 2011
    What kind of beer is this BTW?
     
  7. #7
    JetSmooth

    Well-Known Member

    Posted Jul 6, 2011
    Epic first post!!

    That stuff looks like spray foam insulation.

    I echo the request for the recipe. Looks like it's going to be great!
     
  8. #8
    danorocks17

    Well-Known Member

    Posted Jul 6, 2011
    get yourself about 4 feet of 1 1/4" clear tubing. that size will fit nice and snug into the top of your carboy so you dont need a bung while allowing all the krausen to exit without too much pressure building up. Also use some fermcaps after pitching yeast, that helps keep it low too
     
  9. #9
    ScooterBrewer

    Member

    Posted Jul 6, 2011
    I don't know if it is an issue in this case; but the fermenter should be 20% larger than the batch of beer.
     
  10. #10
    TheMan

    Well-Known Member

    Posted Jul 6, 2011
    You got that right!

    What a mess...
     
  11. #11
    SamuraiSquirrel

    Well-Known Member

    Posted Jul 6, 2011
    Simply beautiful ...........

    Well done, well done
     
  12. #12
    Zixxer10R

    Well-Known Member

    Posted Jul 6, 2011
    Blowoff tube man. So simple man, it's crazy.
     
  13. #13
    Phantastik

    Well-Known Member

    Posted Jul 6, 2011
    Yikes! At what temp did you pitch the yeast? Another thought on avoiding that mess, is to ferment on the lower temp range next time.
     
  14. #14
    JerryMac

    New Member

    Posted Jul 7, 2011
    Lol thanks for all the advice. I didn't know about a blow off tube, but I do now! I do have a 6.5 gallon carboy. I think the future I will use that as the primary and then use the 5 gallon as the secondary.

    I pretty much placed a sheet around the base and let it keep spewing. It calmed down after about 2 hours. Then I put the air lock back in. The airlock actually blew off and hit the ceiling and cracked. There was enough hops in the wort to plug up the airlock. I just hope nothing got inside during that time. I also need to get better and keeping the hops out when I transfer.

    It's the Imperial Nut Brown from Brewer's Best.
     
  15. #15
    JerryMac

    New Member

    Posted Jul 7, 2011
    I think I pitched at 80 degrees, but I put the dry yeast in a 80 degree glass of water first and it was going crazy in there. I think maybe 80 degrees was too warm. But also this did not happy right away. I went to bed 4 hours after putting the airlock on and there was nothing coming through the airlock yet. I got up int he morning and it had exploded in the middle of the night.:)
     
  16. #16
    asterix404

    Well-Known Member

    Posted Jul 7, 2011
    So the other thing to do is to get a 6.5g bucket. It looks like you put 5g of wort into a 5g carboy and ... well... the krausen did really well. Basically, you can't ferment 5g of wort in a 5g carboy, but at this point it's fairly obvious.
     
  17. #17
    NordeastBrewer77

    NBA Playa  

    Posted Jul 7, 2011
    Just a bit. One hell of a krausen ya got there!!! So next time, bigger carboy, lower temp (under 70* for ale) and a nifty lil blowoff tube= no mess.
     
  18. #18
    unionrdr

    Homebrewer, author & air gun shooter  

    Posted Jul 7, 2011
    My ale pale & cooper's micro brew FV are 7-7.5G. They give plenty of head space,one would think. Not so with my APA & IPA,the APA had the blob slowly making it's way out of my airlock. Blow off time! My IPA started with a blow off,co2 like a mad scientist experiment,but little krausen blowing off. It almost sounded like someone pounding on a roof in the distance.
     
  19. #19
    johnnyspade

    Well-Known Member

    Posted Jul 7, 2011
    Geez, is that carpet under there?

    I've never had a major fermenting disaster before but one thing I do as a precaution is put my fermentor(s) inside of a plastic tub. I picked up a few of these tubs from Home Depot ages ago for about 10 bucks each, and they have served me well. They also act as kind of laundry sink sized vessel which makes it easy to clean whatever is in it.

    Please forgive the hastily snapped crappy iPad photo.

    tub.jpg
     
  20. #20
    Scratch

    Active Member

    Posted Jul 8, 2011
    You could avoid it by not going into that section of the house.

    Hope this helps.
     
  21. #21
    harpomarks

    Member  

    Posted Jul 10, 2011
    Hi Jerry. I started brewing again, about a year ago, after a 10 year holiday and forgot about the blow out tube. I made a big stout and had the same thing happen in a closet full of close, the smell is finally gone. I haven't forgot it since. Time to break out the carpet cleaner. Thanks for the great pic.
     
  22. #22
    Kaz

    Well-Known Member

    Posted Jul 10, 2011
    I made a batch of Hefeweizen last year and even in a 6 gallon better bottle, it blew the airlock in our closet. Yeast and trub all over our coats and jackets. Everything gets a blow off tube from now on.
     
Draft saved Draft deleted

Share This Page

Group Builder