Hop Bursting Question | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Hop Bursting Question

Discussion in 'General Homebrew Discussion' started by rmedved, May 19, 2011.

 

  1. #1
    rmedved

    Well-Known Member

    Posted May 19, 2011
    So a couple weeks ago I brewed my first attempt at a hopburst IPA. Essentially I did two ounces each of cascade, centennial and chinook over the last 25 minutes of the boil.

    Should I dry hop before bottling?

    I would love to hear from people who have hopbursted with and without dry hopping.
     
  2. #2
    Beerbeque

    Well-Known Member

    Posted May 19, 2011
    I like to add 2-3 0z of finishing hops at the very end of the boil, right after I shut off the flame. I get so much hop flavor and aroma this way that I never bother with the messy hassle of dry hopping anymore.
     
  3. #3
    Randar

    All your Ninkasi are belong to us  

    Posted May 19, 2011
    How fast did you chill after adding the last additions? If you added at flame-out but it took you 10 minutes to even start making a dent in the temp, then you are going to get a different result than someone who is able to chill to 60 degrees in 10 minutes (just for the sake of comparison).

    I figure dry hopping ain't gonna hurt it since fermentation may drive off some of the aroma you were trying to generate in the first place with all the late additions.
     
  4. #4
    bja

    Well-Known Member

    Posted May 24, 2011
    Is it even legal to make an IPA and not dry hop it?
     
  5. #5
    Doog_Si_Reeb

    Beer is Good. And stuff!

    Posted May 24, 2011
    Not according to Reinheitsgebot... :D
     
  6. #6
    lordbeermestrength

    Well-Known Member

    Posted May 25, 2011
    +1 to beerbeque and randar.

    The whole point of hop bursting (in my opinion) is getting all of the oily hops flavors with less hassle. If you're like me and just like to go over the top sometimes, dry hopping can be fun. But I really don't think it would add a whole lot.
     
  7. #7
    luvhopps

    Well-Known Member  

    Posted May 25, 2011
    I've done it both ways but I prefer to dry hop them also. Hop bursting and dry hopping are two different things so they impart different flavors. I just brewed a pale ale using about five pounds of grains, I wanted a lower alcohol session beer with a lot of flavor, so I hop bursted, and dry hopped. It came out fantastic. I would dry hop it myself.
     
  8. #8
    wonderbread23

    Well-Known Member

    Posted May 25, 2011
    To me there is a distinct quantitative difference between late hops and dry hops. I always do a dry hop for hoppy beers.
     
  9. #9
    Daparish

    Well-Known Member

    Posted May 25, 2011
    Dry hop. Hop-bursting and dry hopping impart different "hoppy" aspects to the beer.
     
  10. #10
    scoundrel

    Well-Known Member

    Posted May 25, 2011
  11. #11
    beeber

    Well-Known Member

    Posted May 26, 2011
    +1 to dry hopping
     
Draft saved Draft deleted

Share This Page

Group Builder