has anyone bottled in a one gallon jug? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

has anyone bottled in a one gallon jug?

Discussion in 'Bottling/Kegging' started by daltonboys, Apr 27, 2012.

 

  1. #1
    daltonboys

    Member

    Posted Apr 27, 2012
    How much priming sugar would you use
     
  2. #2
    ITz-Supreme

    Well-Known Member

    Posted Apr 27, 2012
    What temp what style what sugar
     
  3. #3
    brewingmeister

    Well-Known Member

    Posted Apr 27, 2012
    You are looking for trouble. Gal jugs aren't meant to hold bottle carbing pressures.
     
  4. #4
    Yooper

    Ale's What Cures You! Staff Member  

    Posted Apr 27, 2012
    I agree. Only containers that carbonated beverages come in (beer, soda, champagne) can be safely used. Putting a carbonated beverage in a wine jug or milk jug can be downright dangerous. Don't do it!
     
  5. #5
    daltonboys

    Member

    Posted Apr 27, 2012
    Its a imperial black rye pa. Corn
     
  6. #6
    jessup

    Well-Known Member

    Posted Apr 27, 2012
    Use less priming sugar & drink more quickly than normal. You're asking for trouble but i've done it in a pinch. Giv a week & drink up. If u check it daily you'll be waiting forever.
     
  7. #7
    Revvy

    Post Hoc Ergo Propter Hoc  

    Posted Apr 27, 2012
    Nope, because In don't want to risk losing a gallon of beer by bottling in something not meant to hold the pressure of carbonation.

    Read this, and you'll maybe understand.
     
  8. #8
    daltonboys

    Member

    Posted Apr 27, 2012
    Well how about this. Using a counterpressure filler and bump up the Co 2 so it could still be carbonated around Med to high mouth feel
     
  9. #9
    ITz-Supreme

    Well-Known Member

    Posted Apr 27, 2012
    Not sure you should prolly listen to those guys but I've done it in gallon and half gallon growlers with good results use Teflon tape to seal the cap and I'd prolly use an ounce or a little less than
     
  10. #10
    DannPM

    Well-Known Member

    Posted Apr 27, 2012
    You'd use 1/5th what you'd use for your normal 5 gallon batch, duh :)

    I've done 1L Pellegrino bottles when I first started due to not having enough regular bottles. They worked out fine.
     
  11. #11
    D_Nyholm

    Well-Known Member

    Posted Apr 27, 2012
    With less headspace, you would not need the same amount of priming sugar. Just like you use 1/2 the amount of pruning sugar when you keg as opposed to bottling.
     
  12. #12
    TheGreatReverend

    Well-Known Member

    Posted Apr 28, 2012
    I tried using a Carlo Rossi jug once for primary fermentation on a sample batch. It worked pretty well until the airlock got clogged and the sound of an explosion came from the garage. There was some serious force behind that. Ground zero hardly had any beer at it. That was a mess to clean up.

    If you do try bottling I would use less sugar per gallon and put it in a protective container just in case it explodes. If you have a spare fridge maybe you could put your potential bomb in there. The colder the temperature the higher CO2's miscibility.

    If you had a beer ready to go in a keg, I don't think there's a reason you can't use it as a large growler.
     
  13. #13
    Brewbot-14

    Member

    Posted Apr 28, 2012
    Tried it with my first batch of beer back in high school (figured out the purchase of ingredients didn't have an age requirement :mug:). My girlfriend ended up with a closet full of beer and shards of glass. The gallon jug was all I lost, but it was 1/5 of that batch. Don't do it.
     
Draft saved Draft deleted

Share This Page

Group Builder