Four Tap Cornelius Kegerator - Premium Hardware

Four tap kegerator, based upon a Woods chest freezer. High quality components include:

Pics

-4X stainless steel Cornelius kegs - Purchased new, never used for anything else except homebrewing

-Johnson Controls A490 digital temperature control

-4X stainless steel perlick faucets, forward seal design

-4X steel shanks

-air distributor with 4 check valves

-8X stainless ball lock disconnects (4 gas/4 liquid)

-4X stainless drip trays

- Bevlex 204 air line, Bevlex 200 liquid line

-CO2 tank and two-gauge regulator

-tap cleaning gear and plenty of extra o rings

-unit on a piece of board with casters

-including a picnic tap with a CO2 cartridge keg charger for going mobile

-a few very minor dings on the outside of the unit, commensurate with 4 years of use

-great for force carbonating brew

Located in Columbia, SC, buyer will arrange pickup or shipping. I would charge $1/mile in the range of 50-200 miles if I have to deliver!

$750 firm.

 

Very nice setup, IF your intrested in splitting it up I would be intrested in the faucets and shanks shipped.

 

I'd consider the faucets/shanks/manifold if you decide to split it up.

 

Price reduced for the whole system to $750.

I will try for another couple weeks or so to sell the entire system.

If it doesn't go, then I'll list only the four kegs, taps and all the hardware.

Then if that doesn't go, then I'll consider splitting everything up.

 

Bump.

 

Interested in the kegs if you decide to split.

 

Pics link wont work for me? Can you give another link? Very interested

 

Not sure what happened but this one should work:


https://picasaweb.google.com/101824928756797396829/KegeratorForSale?authuser=0&authkey=Gv1sRgCJCwl5qft8ST8QE&feat=directlink

 

PM sent.

 

Sale pending.

 

Does that sale include the kegs?

 

It does.

 

Does anyone have plans for something like this?

 

I don't think you need plans- it's as simple as building a box, drilling some holes and installing the hardware. Then moving the door from the fridge to the box which wasn't difficult, I used the same hardware.

 

I made something similar check out my keezer build.

 

I'm interested in everything but the freezer. If sale falls through, if we can work something out to off set the shipping I might take everything. Let me know