Bourbon Barrel Porter question | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Bourbon Barrel Porter question

Discussion in 'General Homebrew Discussion' started by knucklenitz, Jun 28, 2012.

 

  1. #1
    knucklenitz

    Well-Known Member  

    Posted Jun 28, 2012
    Hello - I'm doing an all grain kit from NB, Bourbon Barrel Porter. I added the 1oz. of medium oak cubes and 16oz of Makers Mark to the secondary carboy and racked on top. I'm three weeks in and tasted. Not the amount of bourbon flavor I expected.

    Recipe says another week at least. I'm wondering if the bourbon may have stratified and my thief sample didn't get much of it. Anyone experience this? Or maybe my expectations are too high? I'm paranoid about contamination so I don't want to go in for a bunch of samples. Really looking for more flavor and wondering about possibly adding more at bottling...
     
  2. #2
    glenn514

    Supporting Member  

    Posted Jun 28, 2012
    Here's my .02 cents worth: leave it go another week...or two. Then, when you rack it over to the bottling bucket and add the priming sugar, also add more bourbon, if you'd like, and stir the entire mixture GENTLY to make certain everything is well-mixed. Bottle as usual, let them condition for several months and enjoy!

    I've got a twelve-pack of BBP left from my brew in August 2011! Should be getting tasty about now!

    glenn514:mug:
     
  3. #3
    knucklenitz

    Well-Known Member  

    Posted Jun 30, 2012
    Thanks glenn.
     
  4. #4
    dougdecinces

    Well-Known Member

    Posted Jun 30, 2012
    Beer can and probably should stay on oak cubes at least a couple months to really get that oaky flavor. If you're patient enough, let it go a few more weeks. And like Glenn said, you can always add more bourbon.
     
  5. #5
    Stick

    Active Member  

    Posted Jun 30, 2012
    My attempt with this beer (AG) has a bit too much bourbon. I added 20oz of Woodford Reserve and the resulting aftertaste is a little "hot". I also soaked the oak in the bourbon for a week before adding to the secondary where it stayed for an additional 3weeks. My personal opinion is this resulted in just a little too much oak flavor. All in all, a good beer but I am leaning towards a vanilla bourbon porter next time.
     
  6. #6
    befus

    Well-Known Member

    Posted Jun 30, 2012
    That is the most whiskey I have read of being added. ~Most~ I have seen used about 6-10 ounces. Some thought 10 too much, others added more at bottling. I thinl 16 oz. was the high until I read your post. I would agree with you that with that much whiskey (real good whiskey in your case) in there it might be hot and the bourbon might dominate more than enhance.
     
  7. #7
    knucklenitz

    Well-Known Member  

    Posted Jul 1, 2012
    Like the feedback. I'm thinking in my case the bourbon must have settled on bottom and since I have the short thief (haha), I must not have gotten any of that flavor in my sample.

    I'm going to chill out a bit and let it ride for at least a couple more weeks as dougdecinces suggested. Patience...
     
Draft saved Draft deleted

Share This Page

Group Builder