bottle conditioning temperature same as fermentation? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

bottle conditioning temperature same as fermentation?

Discussion in 'Beginners Beer Brewing Forum' started by beer_30, Feb 10, 2014.

 

  1. #1
    beer_30

    Member

    Posted Feb 10, 2014
    I'm going to put together a system so I can keep my fermentation temperatures in check. Wondering if those same temps are good for bottle conditioning?

    As in do I need to have a similar setup for my bottles or do they need warmer temperatures?
     
  2. #2
    webby45wr

    Well-Known Member

    Posted Feb 10, 2014
    Bottle conditioning is usually done around 70F. Ale fermentation is usually 65-68. You could use the same location for fermenting and conditioning.

    I set my bottles in my hallway closet, which is roughly 66 and never had an issue of them not carbing up in about 3 weeks.
     
  3. #3
    C-Rider

    Senior Member  

    Posted Feb 10, 2014
    I ferment my ales around 60* in a freezer.

    I bottle condition around 70* in a refer.
     
  4. #4
    billl

    Well-Known Member

    Posted Feb 10, 2014
    Everyone has their own system, but honestly, it doesn't seem to matter. They will certainly carb up faster at 70 than 65, but the end result seems to be the same.
     
  5. #5
    beer_30

    Member

    Posted Feb 10, 2014
    This is what I was hoping so I could use the same setup for both.
     
  6. #6
    zdbrown1

    Well-Known Member

    Posted Feb 10, 2014
    same set up for both would work....might just take a bit longer to carb up
     
  7. #7
    andy6026

    Well-Known Member

    Posted Feb 11, 2014
    I heard a guy post on here once that you could still bottles in the oven at 150 or 200 or something like that to carb them up very fast. I'm 99% sure he was joking but never got a confirmation. I'm sure those temps would kill the yeast and/or produce off flavors. But who wouldn't want to sample a bottle or two of their beer carbonated and then chilled within hours of bottling?

    Along that same line of thinking though, is there an upper limit to the temps you want to condition beer at?
     
  8. #8
    janson745

    Well-Known Member

    Posted Feb 11, 2014
    He wasnt kidding. Producing 'still' bottles means no carbonation. So, yes, the oven at that temp for about 20 minutes is to just kill the yeast. If you have something with a lot of sugar added at the back end, like real fruit/juices etc., you would want to bottle and let naturally carb up to the level you want, then go to oven/pot of hot water to pasteurize and kill yeast.

    Hope this helps...
     
  9. #9
    andy6026

    Well-Known Member

    Posted Feb 11, 2014
    Don't know how/why I put the word "still" in that, but really didn't intend to. But I guess you answered the question anyways... you can't fast-carb your beer by putting them in the oven. Thanks!
     
  10. #10
    unionrdr

    Homebrewer, author & air gun shooter  

    Posted Feb 11, 2014
    In my experiences,you don't want to go below the yeast's minimum temp,but 70+ is fine. 3 to 4 weeks at 70 or better will carb & condition them in the minimal amount of time. Too low a temp,& they carb very slowly or not at all.
     
  11. #11
    beer_30

    Member

    Posted Feb 11, 2014
    is fermenting at 70 bad?
     
  12. #12
    unionrdr

    Homebrewer, author & air gun shooter  

    Posted Feb 11, 2014
    During primary fermentation,70F is a tad high. But during bottle conditioning,it's different. 70F during bottle carb/conditioning time assures decent carbonation & conditioning of flavors & aromas over 3-4 weeks time.
     
Draft saved Draft deleted

Share This Page

Group Builder