Bev Air BM23 / Where do I find a replacement air hose? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Bev Air BM23 / Where do I find a replacement air hose?

Discussion in 'Kegerators & Keezers' started by akrawiec, Mar 6, 2014.

 

  1. #1
    akrawiec

    Member

    Posted Mar 6, 2014
    Ok so I'm in the process of a rehab project on a 20+ year old bev air BM23, everything works except the hoses were pretty fugly. The tower cooling vent, the funky wire reinforced vinyl tube that runs from the condenser housing up the bottom of the tower....I need to replace this thing, does anyone know where I could buy an original replacement, an after market replacement, or some generic wire reinforced tubing that'll work in place of this?

    BM23.JPG
     
  2. #2
    sandyeggoxj

    Well-Known Member

    Posted Mar 6, 2014
    This hose? If so then just measure it and go to the hardware store and get something similar with the same diameter. Just a thought.

    [​IMG]
     
  3. #3
    akrawiec

    Member

    Posted Mar 7, 2014
    Already tried that and I haven't found one...nothing the right size locally, at Lowes, or home depot.

    Sent from my Nexus 7 using Home Brew mobile app
     
  4. #4
    sandyeggoxj

    Well-Known Member

    Posted Mar 7, 2014
    What is the diameter?
     
    iaefebs likes this.
  5. #5
    akrawiec

    Member

    Posted Mar 7, 2014
    1 1\4 inch outer dia

    Sent from my Nexus 7 using Home Brew mobile app
     
  6. #6
    jcaudill

    Well-Known Member

    Posted Mar 7, 2014
    The inner diameter usually matters more than the outer. What is the inner diameter?
     
    Stealthcruiser likes this.
  7. #7
    ChuckO

    Well-Known Member  

    Posted Mar 7, 2014
    Try a vacuum cleaner repair shop. Looks like a typical hose for a canister model.
     
    Stealthcruiser likes this.
  8. #8
    akrawiec

    Member

    Posted Mar 7, 2014
    Those are 1 1/2 inch to 2 inches...this hose is more narrow.

    Sent from my Nexus 7 using Home Brew mobile app
     
  9. #9
    Stealthcruiser

    Supporting Member  

    Posted Mar 7, 2014


    Reminds me of an old "bonnet" style ladies hair dryer.
     
  10. #10
    sandyeggoxj

    Well-Known Member

Draft saved Draft deleted

Share This Page

Group Builder