Beer style for iron rich water? | HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Homebrew Talk

Help Support Homebrew Talk by donating:

  1. Dismiss Notice
  2. We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.
    Dismiss Notice

Beer style for iron rich water?

Discussion in 'General Homebrew Discussion' started by mutedog, Mar 4, 2011.

 

  1. #1
    mutedog

    Well-Known Member

    Posted Mar 4, 2011
    Anyone aware of a beer style that lends itself well to being brewed with a water that is rich in iron?

    There's a well near my house that takes clean water straight from the aquifer that I'd like to experiment brewing with. The water is hard and has an irony taste.
     
  2. #2
    RMitch

    Well-Known Member

    Posted Mar 4, 2011
    Stout/porter
     
  3. #3
    BigEd

    Well-Known Member

    Posted Mar 4, 2011
    Iron does not belong in any brewing water. Consider diluting, possibly filtering/RO or re-sourcing.
     
  4. #4
    mutedog

    Well-Known Member

    Posted Mar 5, 2011
    Well obviously I don't have to use the water from this well.

    However, since people have been brewing beer for at least ten thousand years there has surely been plenty of beer that's been brewed with iron rich water. Therefore there must be some styles of beer (however obscure) that were developed with water that is rich in iron. Maybe they weren't the most popular styles but they must exist.
     
  5. #5
    BigEd

    Well-Known Member

    Posted Mar 5, 2011
    Re iron: To quote from Greg Noonan's "Brewing Lager Beer":

    "...iron gives an unpleasant, inky taste detectable at levels as low as .05 ppm. Above 1 ppm, iron weakens yeast and increases haze and oxidation of tannins. It blackens porcelain and spots fabrics at .02 ppm, causes white turbidity in water, and corrodes metal. Levels should be less than .3 ppm. Reduce iron content to .1 ppm by aerating and filtering the water through sand. "

    Excessive iron can also contribute to haze and sluggish fermentation. Iron is an enemy of yeast.

    This is not my opinion, it is fact. You do not want iron in your brewing water. :mug:
     
  6. #6
    mutedog

    Well-Known Member

    Posted Mar 5, 2011
    I'll see if I can locate a water analysis of this well. I don't believe the levels are exceptionally high but you can taste the iron in the water.
     
  7. #7
    Yooper

    Ale's What Cures You! Staff Member  

    Posted Mar 5, 2011
    If you can taste iron in the well, the beer made from it will have a metallic "blood" flavor to it.
     
  8. #8
    devilishprune

    Well-Known Member

    Posted Mar 5, 2011
    Make a halloween themed vampire beer. It'll be a hit in 7 months!
     
  9. #9
    ArcaneXor

    Well-Known Member

    Posted Mar 5, 2011
    I'd suggest making a tomato beer and calling it "Tru Blood". Would be great Halloween gag (or if you know any True Blood fans, they'll love it any time of the year).
     
  10. #10
    mutedog

    Well-Known Member

    Posted Mar 7, 2011
    Found some more detailed info on this water:
    The iron levels are 0.7 ppm
    Also according to the freshwater sciences professor who determined these levels the iron will oxidize and precipitate out after a few hours contact with air.

    additional info:
    Calcium : 52.5
    Magnesium : 33.9
    Sodium : 26.2
    Potassium : 1.4
    Bicarbonate : 268.4
    Chloride : 13
    Sulfate : 120
    pH : 7.4
     
  11. #11
    Nokitchen

    Well-Known Member

    Posted Mar 7, 2011
    Jesus, that's not water, it's club soda! I agree with the others; it might be fun to make a novelty beer with your water but I'm not aware of any commercially available beers or known beer styles which derive from a local tradition of iron-rich water.
     
  12. #12
    mutedog

    Well-Known Member

    Posted Mar 7, 2011
    heh, now I'm wondering if something good could be brewed from it. A challenge of sorts...
     
  13. #13
    ericd

    Well-Known Member

    Posted Mar 7, 2011
    You could dilute it 1:1 with distilled water and experiment. A bit too stiff as is methinks.
     
Draft saved Draft deleted

Share This Page

Group Builder