Quantcast
Namespaces
Variants
Actions
Personal tools

Cornelius keg

From HomeBrewTalk Wiki
Revision as of 15:05, 24 September 2007 by Chapka (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
5 gallon "corny" kegs

A Cornelius keg or Corny keg is a type of keg originally manufactured by the Cornelius company for use in the soda industry. Now obsolete, they are easy to find used and popular with home brewers.

About Cornelius Kegs=

These kegs are generally preferred by home brewers because they are well suited for storage in converted freezer kegerators and hold the typical 5 gallon batch of beer. These kegs can be found in used condition, usually filled with residual CO2 pressure and a bit of old syrup, for a few dollars more than their worth in stainless steel scrap. 2 and 3 gallon versions are also available, although they are rarer than full-sized 5-gallon kegs.

Two different disconnect/coupling systems were widely used and their difference is in how the coupling connects. Ball locks and pin locks are NOT interchangable.

Using Cornelius Kegs

At the very minimum, all 5 O-rings should be replaced and the kegs should filled with hot water/detergent over night (followed by sanitizer) before the first brewing use of a Cornelius keg that has previously been used for soda.